User's Manual

AS-1 WRITER User Manual Rev.1.0 7 / 8
Rev.1.0
TAKUMA SEIKO CO., LTD
Read operation:
- Turn on the power.
- Put AS-1 WRITER above the ID tag you want to read.
- Set R/W switch to READ side.
- Press the EXE button.
- If reading was succeeded, ID address number will present on LCD display.
If reading was succeeded, EXE LED will light 100msec.
If reading was failed, LCD display will present Rd ADRS: xxx .
During read operation, CLEAR, UP, X10, DOWN button disabled.
Other:
- If Battery voltage check function finds low battery voltage situation will display
Low Battery! .
- LCD backlight will turn off automatically if no any buttons pressing during in a
few seconds.
― ― ― Read mode ― ― ―
Rd ADRS: xxx