Suzhou Talesun Solar Technologies Co., Ltd. REVISIONS REV ECN / NPA DESCRIPTION OF CHANGE CHK’D/DATE APP’D/DATE Yingliang.qiu 05-2019 Zhenzhou.gao 08-2019 TITLE: Installation manual for crystalline solar photovoltaic A0 04-2019 New Edition Zhenzhou.gao 05-2019 A1 08-2019 Updated edition Caiping.huang 08-2019 modules（Half Cell） PART NO.: SPEC. NO.: TS-ET-045 N/A DRAWN BY Yujie Qian SHEET REV: A1 1 OF 1 Suzhou Talesun Solar Technologies Co., Ltd Address: No.
苏州腾晖光伏技术有限公司 文件制定、修改、废除申请(审核)电子会签单 标题 TS-ET-045 A1 Installation manual for crystalline solar photovoltaic modules（Half Cell） 流程编号 WJ20190803699 文件名称 TS-ET-045 A1 Installation manual for crystalline sola r photovoltaic modules（Half Cell） 文件编号 版本 生效日期 申请人 制修订日期 钱瑜杰 部门 TS-ET-045 A1 2019-08-07 组件工艺整合部 2019-08-03 修订内容 Modify 版本更新 文件类别 三阶Specification、技术条件、技术标准、技术要求 选择文件发放范围（不同文件类别有不同的发放范围） 财务部 工程技术部（组件） 资讯管理部 质量体系&认证部 全球物流运营部 法务部 人力资源部 工程技术部（电池） 生产计划部 IQA&SQE 项目管理部 技术研发部（组件） 总裁办 工程设
PRODUCT SPECIFICATION SPEC.NO. 名称: Installation manual for crystalline REVISION solar photovoltaic modules（Half Cell） EFFECTIVE DATE TS-ET-045 A1 08-2019 Page 1 of 26 INSTALLATION MANUAL For crystalline solar photovoltaic modules “According with IEC61215 edition 2 & IEC61730 standards” Suzhou Talesun Solar Technologies Co., Ltd Address: No. 1 Talesun Road, Changkun Industrial Park, Shajiabang Town, Changshu, Suzhou, Jiangsu Province, 215542, P.R.China Website: www.talesun.com Email: sales@talesun.
PRODUCT SPECIFICATION SPEC.NO. 名称: Installation manual for crystalline REVISION solar photovoltaic modules（Half Cell） EFFECTIVE DATE TS-ET-045 A1 08-2019 Page 2 of 26 INDEX 1. INTRODUCTION 1.1 PURPOSE OF THE MANUAL 1.2 DISCLAIMER OF LIABILITY 1.3 PRODUCTION IDENTIFICATION 2. SAFETY GUIDELINES 2.1 GENERAL SAFETY GULDELINES 2.2 PRODUCT PRECAUTION 2.3 TRANSPORT AND STORAGE SAFETY GUIDELINES 3. MECHANICAL INSTALLATION 3.1 SELECTING THE LOCATION 3.2 SELECTING THE PROPER SUPPORTING FRAME 3.
PRODUCT SPECIFICATION SPEC.NO. 名称: Installation manual for crystalline REVISION solar photovoltaic modules（Half Cell） EFFECTIVE DATE TS-ET-045 A1 08-2019 Page 3 of 26 1 INTRODUCTION 1.1 PURPOSE OF THE MANUAL This guide contains information on precautions to be used during the handling and installation of Suzhou Talesun Solar Technologies Co., Ltd photovoltaic modules along with technical instructions to be followed during installation, mounting, wiring and maintenance thereof.
PRODUCT SPECIFICATION SPEC.NO. 名称: Installation manual for crystalline REVISION solar photovoltaic modules（Half Cell） EFFECTIVE DATE TS-ET-045 A1 08-2019 Page 4 of 26 1.3 If your questions are not adequately addressed in this manual, please first contact your system supplier. You can find more information on our website www.talesun.com.
PRODUCT SPECIFICATION SPEC.NO. 名称: Installation manual for crystalline REVISION solar photovoltaic modules（Half Cell） EFFECTIVE DATE TS-ET-045 A1 08-2019 Page 5 of 26 Do not wear metallic ornaments or metallic devices while installing or troubleshooting photovoltaic systems. WARNING! Danger of injury due to broken glass! Risk of injury due to falling modules! The modules are primarily made of glass and must therefore be handled with appropriate caution.
PRODUCT SPECIFICATION SPEC.NO. 名称: Installation manual for crystalline REVISION solar photovoltaic modules（Half Cell） EFFECTIVE DATE TS-ET-045 A1 08-2019 Page 6 of 26 Do not stand on the modules. Do not drop or place objects on the modules. 3 MECHANICAL INSTALLATION 3.1 SELECTING THE LOCATION The modules are certified according to the norm IEC 61215 and others for safe operation in moderate climates.
PRODUCT SPECIFICATION SPEC.NO. 名称: Installation manual for crystalline REVISION solar photovoltaic modules（Half Cell） EFFECTIVE DATE TS-ET-045 A1 08-2019 Page 7 of 26 Install the module in such a way that the junction box is positioned in the upper area of the module and the wires hang downwards. The optimal tilt angle of the module depends on the respective latitude. We recommend a photovoltaic simulation tool to ensure the optimal orientation.
PRODUCT SPECIFICATION SPEC.NO. 名称: Installation manual for crystalline REVISION solar photovoltaic modules（Half Cell） EFFECTIVE DATE TS-ET-045 A1 08-2019 Page 8 of 26 this installation, additional mounting points should be used. System designer and installer are responsible for load calculations and for proper design of support structure. Use appropriate corrosion-proof fastening materials. All mounting hardware (bolt/split washer/flat washer/nut) should be stainless steel M8 size.
PRODUCT SPECIFICATION SPEC.NO. 名称: Installation manual for crystalline REVISION solar photovoltaic modules（Half Cell） EFFECTIVE DATE TS-ET-045 A1 08-2019 Page 9 of 26 Ensure that the drainage openings of the frame are left open following installation to allow water runoff. This prevents frost damage. Install the module in such a way that rainwater and snowmelt can run off freely to avoid standing water or pudding.
PRODUCT SPECIFICATION SPEC.NO.
PRODUCT SPECIFICATION SPEC.NO. 名称: Installation manual for crystalline REVISION solar photovoltaic modules（Half Cell） EFFECTIVE DATE TS-ET-045 A1 08-2019 Page 11 of 26 Use a torque wrench for installation, and the compression for each clamps is not strong to avoid potential damages to module frames. The recommended maximum compression for each clamp is 20MPa (2900PSI). The module mounting structure must be made of durable, corrosion-resistant and UV-resistant material.
PRODUCT SPECIFICATION SPEC.NO. 名称: Installation manual for crystalline REVISION solar photovoltaic modules（Half Cell） EFFECTIVE DATE TS-ET-045 A1 08-2019 Page 12 of 26 in perfect electrical and mechanical condition. Only use solar cables as connection cables. Use connectors of the same type and manufacturer within a solar system, and compatible connectors to connect the inverter.
PRODUCT SPECIFICATION SPEC.NO. 名称: Installation manual for crystalline REVISION solar photovoltaic modules（Half Cell） EFFECTIVE DATE TS-ET-045 A1 08-2019 Page 13 of 26 remove) the screw of the grounding clip to (and from) the frame. For the grounding clip with the 8--32 screw and hex nut or Keps nut, a 3/8--in. wrench must be used to secure (and remove) the nut of the grounding clip to (or from) the frame. The recommended screw tightening torque is 1.7+0.5/-0.2Nm (15+4.4/-1.7 in.-lbs).
PRODUCT SPECIFICATION SPEC.NO. 名称: Installation manual for crystalline REVISION solar photovoltaic modules（Half Cell） EFFECTIVE DATE TS-ET-045 A1 08-2019 Page 14 of 26 Mounting Wire Placement Termination Suzhou Talesun Solar Technologies Co., Ltd Address: No. 1 Talesun Road, Changkun Industrial Park, Shajiabang Town, Changshu, Suzhou, Jiangsu Province, 215542, P.R.China Website: www.talesun.com Email: sales@talesun.
PRODUCT SPECIFICATION SPEC.NO. 名称: Installation manual for crystalline REVISION solar photovoltaic modules（Half Cell） EFFECTIVE DATE TS-ET-045 A1 08-2019 Page 15 of 26 5 COMMISSION AND MAINTENANCE 5.1 BLOCKING DIODES AND BYPASS DIODES Blocking diodes prevent current flowing from the battery to the module when no electricity is being generated. It is recommended to use blocking diodes when a charging regulator is not used. Your specialist dealer can advise you regarding the suitable types.
PRODUCT SPECIFICATION SPEC.NO. 名称: TS-ET-045 Installation manual for crystalline REVISION solar photovoltaic modules（Half Cell） EFFECTIVE DATE A1 08-2019 Page 16 of 26 6 TECHNICAL DATA(156.
PRODUCT SPECIFICATION SPEC.NO. 名称: TS-ET-045 Installation manual for crystalline REVISION solar photovoltaic modules（Half Cell） EFFECTIVE DATE A1 08-2019 Page 17 of 26 TP6H72P-365 Maximum System Voltage(V) 1000(IEC) 365 39.8 9.18 47.4 9.71 TP6H72P-360 1000(IEC) 360 39.5 9.12 47.2 9.64 TP6H72P-355 1000(IEC) 355 39.2 9.07 47.0 9.58 TP6H72P-350 1000(IEC) 350 38.9 9.01 46.8 9.52 TP6H72P-345 1000(IEC) 345 38.6 8.95 46.6 9.46 TP6H72P-340 1000(IEC) 340 38.3 8.89 46.
PRODUCT SPECIFICATION SPEC.NO. 名称: TS-ET-045 Installation manual for crystalline REVISION solar photovoltaic modules（Half Cell） EFFECTIVE DATE A1 08-2019 Page 18 of 26 TP6H72M-340 Maximum System Voltage(V) 1000(IEC) 340 38.2 8.90 46.8 9.45 TP6H72M-335 1000(IEC) 335 38.0 8.82 46.6 9.36 TP6H60P-320 1000(IEC) 320 34.4 9.32 41.4 9.79 TP6H60P-315 1000(IEC) 315 34.1 9.25 41.1 9.72 TP6H60P-310 1000(IEC) 310 33.8 9.18 40.8 9.65 TP6H60P-305 1000(IEC) 305 33.5 9.11 40.
PRODUCT SPECIFICATION SPEC.NO. 名称: TS-ET-045 Installation manual for crystalline REVISION solar photovoltaic modules（Half Cell） EFFECTIVE DATE A1 08-2019 Page 19 of 26 TP6H60M-285 Maximum System Voltage(V) 1000(IEC) 285 32.1 8.88 39.1 9.41 TP6H60M-280 1000(IEC) 280 31.8 8.81 38.9 9.35 TP6H60M-275 1000(IEC) 275 31.5 8.73 38.7 9.30 Pmax (W) Vmpp (V) Impp (A) Voc (V) Isc (A) 385 41.0 9.42 48.2 9.
PRODUCT SPECIFICATION SPEC.NO. 名称: TS-ET-045 Installation manual for crystalline REVISION solar photovoltaic modules（Half Cell） EFFECTIVE DATE A1 08-2019 Page 20 of 26 TP6H72M(H)-395 Maximum System Voltage(V) 1500(IEC) 395 40.7 9.71 49.3 10.18 TP6H72M(H)-390 1500(IEC) 390 40.5 9.64 49.2 10.11 TP6H72M(H)-385 1500(IEC) 385 40.3 9.57 49.0 10.04 TP6H72M(H)-380 1500(IEC) 380 40.0 9.50 48.7 9.97 TP6H72M(H)-375 1500(IEC) 375 39.8 9.43 48.5 9.
PRODUCT SPECIFICATION SPEC.NO. 名称: TS-ET-045 Installation manual for crystalline REVISION solar photovoltaic modules（Half Cell） EFFECTIVE DATE A1 08-2019 Page 21 of 26 TP6H60M(H)-340 Maximum System Voltage(V) 1500(IEC) 340 36.0 9.46 41.3 10.05 TP6H60M(H)-335 1500(IEC) 335 35.6 9.43 41.1 9.99 TP6H60M(H)-330 1500(IEC) 330 35.2 9.40 40.9 9.94 TP6H60M(H)-325 1500(IEC) 325 34.7 9.37 40.7 9.87 TP6H60M(H)-320 1500(IEC) 320 34.3 9.34 40.5 9.
PRODUCT SPECIFICATION SPEC.NO. 名称: TS-ET-045 Installation manual for crystalline REVISION solar photovoltaic modules（Half Cell） EFFECTIVE DATE A1 08-2019 Page 22 of 26 Max.
PRODUCT SPECIFICATION SPEC.NO. 名称: TS-ET-045 Installation manual for crystalline REVISION solar photovoltaic modules（Half Cell） EFFECTIVE DATE A1 08-2019 Page 23 of 26 Module Maximum System Voltage(V) Pmax (W) Vmpp (V) Impp (A) Voc (V) Isc (A) TP6H72M-370 1000(IEC) 370 39.1 9.47 47.8 10.07 TP6H72M-365 1000(IEC) 365 38.9 9.39 47.6 9.99 TP6H60P-305 1000(IEC) 305 32.9 9.28 39.9 9.97 TP6H60P-300 1000(IEC) 300 32.6 9.21 39.6 9.89 TP6H60P-295 1000(IEC) 295 32.3 9.
PRODUCT SPECIFICATION SPEC.NO. 名称: TS-ET-045 Installation manual for crystalline REVISION solar photovoltaic modules（Half Cell） EFFECTIVE DATE A1 08-2019 Page 24 of 26 Module Maximum System Voltage(V) Pmax (W) Vmpp (V) Impp (A) Voc (V) Isc (A) TP6H72P(H)-350 1500(IEC) 350 38.3 9.14 46.5 9.64 TP6H72P(H)-345 1500(IEC) 345 38.0 9.08 46.2 9.58 TP6H72P(H)-340 1500(IEC) 340 37.7 9.02 46.0 9.51 TP6H72P(H)-335 1500(IEC) 335 37.4 8.96 45.7 9.
PRODUCT SPECIFICATION SPEC.NO. 名称: TS-ET-045 Installation manual for crystalline REVISION solar photovoltaic modules（Half Cell） EFFECTIVE DATE A1 08-2019 Page 25 of 26 Module Maximum System Voltage(V) Pmax (W) Vmpp (V) Impp (A) Voc (V) Isc (A) TP6H60M(H)-345 1500(IEC) 345 35.6 9.76 41.1 10.36 TP6H60M(H)-340 1500(IEC) 340 35.2 9.72 40.9 10.32 TP6H60M(H)-335 1500(IEC) 335 34.7 9.69 40.7 10.29 TP6H60M(H)-330 1500(IEC) 330 34.3 9.66 40.5 10.
PRODUCT SPECIFICATION SPEC.NO. 名称: Installation manual for crystalline REVISION solar photovoltaic modules（Half Cell） EFFECTIVE DATE TS-ET-045 A1 08-2019 Page 26 of 26 Fax：(408) 642-1279 UK Talesun Energy UK Ltd. 42, Upper Berkeley Street, London, W1H5PW United Kingdom Email: projects@talesunenergy.com Web: www.talesun-eu.com Tel: +44 (0)20 3752 6516 GERMANY Central Tower Munich, Landsberger Strasse 110, 80339 Munich, Germany Email: info@talesunenergy.com Web: www.talesun-eu.
