- CentrePoint Technologies Answering Machine - Answerphone User Manual

142 TALKSWITCH USER GUIDE • UK & IRELAND
Touch-tone features dialed from a Local Extension
2xx 980 1 Enter Remote ext. (2xx) Turn on “Same Line Connect”
2xx 9 <Hunt
Group>
Enter Remote ext. (2xx) “Connect using:” Hunt Group
(Hunt Group = 9, 81-88)
1xx 61 Enable ‘Do not Disturb’ at the Local Extension
1xx 60 Disable ‘Do not Disturb’ at the Local Extension
Command Function performed Notes
1x1-1x8 Intercoms a Local
Extension
x r e p r e s e n t s t h e U n i t I D
2x1-2x8 Dials a Remote Exten-
sion (associated with
an external phone
number).
x r e p r e s e n t s t h e U n i t I D
250-299 Speed dial for VoIP
calls. TalkSwitch will
hunt the VoIP ports, go
off hook then dial the
digits entered.
300-309 Dials an Extension Ring
Group. 10 in total for
the entire system.
Mapped to local exten-
sion(s), with specific
fall through options.
<recall> if
connected
to a caller
Puts caller on hold. After putting a caller on
hold, you receive internal
dialtone
<recall> at
internal
dialtone
It retrieves the most
recent caller put on
hold.
To retrieve the caller on
hold for the most time,
dial 7 at internal dial-
tone.
<recall> at
external
dialtone
Switches to internal
dialtone. Used mainly
when an extension has
Direct Line Access
enabled.