User guide

6 WWW.TALKSWITCH.COM

TS-200 USER GUIDE

HEADSET OPERATION (OPTIONAL)

If you are using a headset, you will need to configure your telephone to operate

in headset mode. Configuring the TS-200 for headset mode allows you to place

calls using the headset without the need to lift the handset.

The TS-200 supports 2 types of headsets:

Headsets with RJ22 (handset) connectors Headsets with 2.5mm connectors

Installing headsets with RJ22 connectors

Note: In order to use a headset with an RJ22 connector, you will need an external

controller/amplifier to switch between handset and headset.

1. Connect your headset to the phone.

• Disconnect the handset from the handset jack on the left of the phone.

• Plug your headset controller into the handset jack.

• Plug the handset into the headset controller.

2. Configure the phone for headset mode.

• Press the button.

• Press the key for HEADSET

• Press the softkey.

• Press the softkey to turn headset mode on.

• Press the softkey.

• Press and hold the button to exit the option menus.

SAVE

CHNG

SELECT

OPTIONS