User guide

WWW.TALKSWITCH.COM 7
TS-200 USER GUIDE
Installing headsets with 2.5mm connectors
1. Plug your headset into the 2.5mm jack located on the right side of the phone.
2. The phone will automatically detect the headset and enable headset mode.
Using headsets with the TS-200
Once headset mode is enabled, you can make and receive calls using the headset
without having to lift the handset.
The function of the button changes once a headset is installed:
• Pressing the button once places the phone off-hook for making or
receiving calls with the headset.
• Pressing the button a second time engages the speakerphone
instead of the headset.
• Pressing the button a third time disconnects the call.
• Pressing the button at any time will also disconnect the call.
SETTING THE DATE AND TIME
Date and time is automatically set when the phone receives its first phone call.
It will use the time and date from Caller ID to synchronize itself with the
TalkSwitch date and time.
2.5 mm Headset Jack