User guide

WWW.TALKSWITCH.COM 11
TS-200 USER GUIDE
PUTTING A CALL ON HOLD
You can put a call on hold by pressing the button. Once a call is on hold,
you can hang up your phone without losing the call.
In order to get re-connected to a call that you previously put on hold, you must
first lift the handset or press the button, then press the button. You
will be reconnected to your previous call.
Note: A call that was put on hold at a specific extension can only be retrieved
from the same extension. In order to re-connect to a call from a different
extension, use the call park and unpark functions.
TRANSFERRING A CALL
When you’re on a call, you can transfer it to another extension or voicemail box.
1. Press the softkey to put the current call on hold.
2. Dial the number of the extension or followed by the mailbox number if
you are transferring the caller to a voicemail box.
3. Hang up the call. The person on hold will be connected to the number you
just dialed.
4. If the number you dialed is busy or unavailable, you can press the
softkey to get re-connected to your call on hold.
CONFERENCING CALLS
When you are on a call, you can add another person to create a three-way call.
1. Press the button to put the current call on hold.
2. Dial the number of the extension or phone number of the person you would
like to conference in.
3. Once the person has answered, press the button to add the call
currently on hold to your conversation.
4. If the number you dialed is busy or unavailable, press the softkey
to get re-connected to your call on hold.
CNCL
CONF
CNCL
*
TRAN