User guide

CCTV Tester User’s Manual



12

3.9 Video generating

A. Connect the tester to the displayer device as the picture shows:

B. In the main menu, press the num-button”4” to switch to the video generating function

submenu, as the follows:

C. Operation setup

• Press num-button “4” to switch to the video generating function mode.

• Press SET to switch the video generating signal: Color bar, Blue, Red, Pink,

Green, Cyan, Yellow and White.

• Press TELE to send the generated video signal to the display device.

• Press WIDE to recall the generated video signal.

• Press MENU button in short time to hid/display the video generating menu

character.

• Press MENU button for 1 second to back to the main menu.

3.10 RS485 data test

. Connect the tester to the controlling device as the picture shows: