DRL Series Digital Video Recorder User Manual DRL1600 / DRL800 / DRL400 0
WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
IMPORTANT SAFETY INFORMATION 1. Read Instructions 13. Damage requiring Service All the safety and operating instructions should be read before the the manufacturer as such additions may result in the risk of fire, Unplug this equipment from the wall outlet and refer servicing to qualified service personnel under the following conditions: A. When the power-supply cord or the plug has been damaged. B. If liquid is spilled, or objects have fallen into the equipment. C.
INDEX ---------------------------------------------- 6 ------------------------------------------------- 6 --------------------------------------------------------- 6 ---------------------------------------------- 7 ----------------------------------------------------------- 8 --------------------------------------------------------- 8 ----------------------------------------------- 9 ---------------------------------------------- 10 3.
INDEX ----------------------------------------------------- 34 ------------------------------------------------------- 34 ----------------------------------------------------------- 35 ---------------------------------------------------------- 36 ----------------------------------------------------- 37 -------------------------------------------------- 38 ------------------------------------------------------- 39 5.3.1 MOTION ------------------------------------------------------- 39 5.3.
INDEX ------------------------------------------------------------- 62 ------------------------------------------------------- 63 ---------------------------------------------------- 63 -------------------------------------------------- 64 ---------------------------------------------------- 65 -------------------------------------------------- 66 ------------------------------------------------ 67 --------------------------------------------- 67 ---------------------------------------------
1. SAFETY CAUTIONS ▪ Follow these instructions to keep the user safe and prevent property damage. Read them carefully before the use of the product. The responsibility falls on the user to install and use the product properly. 1.1 Power Source-related 1.2 Installation-related ① Insert the power plug fully and firmly into the power source. - Unstable connection may cause fire. ① Do not place candlelight or cigarette light on top of the product or do not install the product near heating devices.
1.3 Cleaning and Usage-related ⑥ When cleaning the product, unplug the power cord and gently wipe using a soft cloth. Do not directly spray water on the product or do not use benzene, thinner or alcohol when cleaning. ① Un p lu g the p o wer p l ug du rin g li ghtnin g , thunderstorm or when not in use for long periods of time. - It may cause electric shock or fire. - It may cause electric shock or fire.
2. OUTLINE 2.1 Functions *Some Functions May Not Be Supported By All Models This DVR provides superior video image quality, reliability, and performance.
2.
3. DVR ORGANIZATION 3.
3. DVR ORGANIZATION 3.1 Front Panel Description NOTE: Turn on the DVR after connecting the power cord, camera input and monitor completely USB Port Number Buttons Display / Record Menu / ESC Direction Buttons Enter Button Front LED Record Network Remote Control Sensor Rotate / Backup Search / Pause Fast Reverse Play Button / PTZ ▪ Front LED Recording LED Recording LED lights up when DVR is recording. Network LED Network LED lights up when DVR is connected by network.
- Front Button The front panel of the DVR is similar to a normal VCR or Multiplexer and the functions are also similar. Front panel controls can be used for all of the DVR functions. Please refer to the following controls, functions and descriptions: NUMBER buttons (0 ~ 9) Displays selected camera number to full screen. Number buttons are also used to enter passwords. NOTE: To select number 11 and up use the +10 button.
Direction buttons (▲, ▼, ◀, ▶ ) These buttons are used to move to another menu or change the position of the screen. In PTZ mode, buttons are used for PAN/TILT function. ▲ : In Playback mode Panorama search function button. In PTZ mode used to move the camera up. ▼ : In Playback mode Smart search function button. In PTZ mode to move the camera to down. ◀ : In Playback mode reverses playback and when playback is paused the control is now a manual frame advance. In PTZ mode to move the camera to left.
3.
3.
3.3 Remote Controller ID RECORD DISPLAY ESC ROTATE MENU LOCK(LOG-OUT)/ REPEAT NUMBER ▲ Direction Key /Panorama Play ◀ Direction Key / Reverse Play ENTER ▶ Direction Key / Play Fast Reverse Play/ PTZ ▼ Direction Key /Smart Play PAUSE Fast Forward Play / PLAY BACKUP SEARCH PTZ ZOOM PTZ PRESET PTZ FOCUS PTZ IRIS ▪ How to set ID ① Before setting up IR remote ID, Enter the GENERAL SETUP and select the unit ID.
4. LIVE 4.1 Live Screen Execution Information Message Camera Name Record Status Icon Live Screen PTZ Control Information Screen Expand/Reduction Window Backup Progress Status(%) Current Date and Time Current Channel Information Icon Current Event Information Icon Sequence Icon - Record Icon (Red) When record in live screen. - Video-loss Icon When there is no video input. - Time Icon When record by designated time. - Audio Icon When sound is generated in live mode.
4.1.1 Top Menu In live screen, if ▲ button of the remote controller or front panel is pressed, or if the mouse cursor is placed over the top area of the screen this menu will appear. Search Backup Status Setup Log-out 4.1.2 Bottom Menu In Live screen, if ▼ button of the remote controller or front panel is pressed, or if the mouse cursor is placed over the bottom area of the screen this menu will appear.
4.1.3 CAMEO Menu In live screen, if the ENTER button of the remote control or front panel is pressed, a blue square cursor will appear. If the ENTER button is pressed again, the CAMERA menu will appear. ▪ CAMEO CHANGE: The live camera view can be moved to a different camera channel. Select the cameo change option to move the camera view to the new channel ▪ PLAYBACK : Playback on selected channel. (replays last15~20 seconds) ▪ FREEZE: Live screen of the selected channel can be paused.
▪ PTZ: PTZ Camera should be installed otherwise the PTZ menu can not be activated. The following GUI will appear when the PTZ menu is selected [MENU] button. ▪ Using Mouse: For the above menu click the right mouse button to control functions Zoom, Focus and Iris functions. Menu Z+ / Z- : Zoom In / Zoom Out F+ / F- : Focus In / Focus Out I+ / I- : Iris In / Iris Out ▪ Using Remote Controller or Front Key: The below PTZ Hot Key menu is available. - Press the ENTER button on PTZ Camera channel.
▪ SPEED SETUP: Set the PTZ camera speed (1 to 8) NOTE: If the mouse is used to move the PTZ camera, the movement speed depends on the position of the mouse. As the mouse pointer moves away from the center the speed becomes faster. ▪ PRESET SETUP: Set the preset position. If the position setup is saved, PTZ camera can be directed to the preset position. ▪ PRESET TOUR: 6 different preset list can be created. If the created preset lists are set to “ON”, movement is made with preset tour.
5. SETUP General, Camera, Event, Schedule, Ethernet and System Information. On the Top menu, select the [SETUP] menu. After menu is selected the following Log-in window will appear. Enter the password by the key buttons and press the ENTER button. (The default password : 1111) 5.1 GENERAL SETUP General, Alarm, Disk, Monitor, Account, Configuration setup and Shutdown. Select the [GENERAL] menu.
5.1.1 GENERAL [SYSTEM] ▪ VIDEO FORMAT: Set the Camera Type (NTSC / PAL) If menu is set to AUTO the DVR will recognize the camera type automatically. NOTE: If NTSC and PAL cameras are connected simultaneously error may occur. ▪ LANGUAGE: Select the language. (English, German, French, Spanish, Japanese, Chinese, Italian, Russian, Dutch and Korean) ▪ KEY TONE: Turn on/off the buzzer sound of key. ▪ UNIT ADDRESS: Sets the DVR ID. This ID can be used to control multiple DVR’s with one IR remote control.
5.1.1 GENERAL [DATE / TIME] ▪ DATE FORMAT: Select the data format. (YY/MM/DD) / (MM/DD/YY) / (DD/MM/YY) ▪ TIMEZONE: Select the time zone and DST. The city which don’t use DST is set to [OFF] automatically. ▪ DATE DISPLAY: Display date on live screen or not. ▪ DATE / TIME: Change date and time. ▪ NTP: Select the usage of NTP setting. DVR time is synchronized with NTP server for date and time. The default server is [pool.ntp.org] and user can input other server. [Sync now] : Synchronize immediately.
5.1.2 ALARM OUT ▪ SIGNAL: Select on/off to use alarm by channel. ▪ ALARM SET: Check the alarm connection to ensure it is working properly. Press the [SET] button then alarm device will be activated. ▪ ALARM CLEAR: Press the [CLEAR] button then alarm will be cleared. 5.1.3 DISK [HDD] - When HDD is selected under [TYPE], HDD information will be displayed. [INSTALL] - Formats HDD.
[CHECK / USB] ▪ EARLIEST RECORD: Displays the earliest recorded data information. ▪ LATEST RECORD: Displays the latest recorded data information. ▪ DISK CHECK: Checks the HDD for errors. ▪ USB RESET: Resets the USB connection. ▪ USB FORMAT: Formats the USB device or media.
5.1.4 MONITOR ▪ RESOLUTION: Select the optimal resolution for the connected monitor. If you select the [AUTO] option, HDMI monitors will auto recognize the output resolution. ▪ VIDEO OUT: Select main monitor. (MAIN–VGA / AUX-BNC Monitor) (Fix the screen by connected monitor) ▪ OSG OUT: Select the monitor for menu screen to display. ▪ BORDER COLOR: Change the border color. ▪ ALPHA BLENDING: Set the transparency of menu.
5.1.5 ACCOUNT ▪ Add / delete any user and select permissions. ▪ When adding users new passwords are required. ▪ When deleting users you will need to confirm selection. NOTE: (Default ADMIN password is 1111) Initial user name can be modified not deleted. CAUTION: Default Admin account must not be deleted before adding new users. If default admin user is deleted before adding new users you can not access [SETUP] menu. ▪ By the [PERM] menu permissions can be assigned to each ID.
5.1.6 CONFIGURATION ▪ SLOT: Select the slot/name to load or save DVR configurations. ▪ DEFAULT: Reset to factory default settings. ▪ DATE: Displays the configuration save date. ▪ LOAD: Loads the saved configuration data. ▪ SAVE: Saves the configuration data. ▪ DEL: Deletes the saved configuration data. ▪ EXPORT: Exports the configuration settings to USB or DVD. ▪ IMPORT: Imports configuration settings from USB or DVD.
5.1.7 SHUTDOWN ▪ RESTART: Restarts the DVR. ▪ SHUTDOWN: Shuts down the DVR.
5.2 CAMERA SETUP In this menu is the Camera, PTZ, Spot, Sequence and Privacy Zone settings. Select the [CAMERA] Menu. 5.2.1 CAMERA ▪ CAMERA LABEL: Select the camera channel label for live viewing. (ALL / NUMBER / NAME / OFF) ▪ NAME: Change the camera name. ( If select the camera name, the virtual keyboard will be displayed). ▪ INSTALL: Select On/Off button to use camera channel. ▪ HIDDEN: Select On/Off button to hide camera on live view.
5.2.1 CAMERA When selecting the camera, the virtual keyboard will appear. Maximum 10 characters. [Virtual Keyboard] 5.2.2 PTZ [PTZ] ▪ PORT: Select the Baud Rate for the PTZ camera. ▪ ID: Select the ID for the PTZ camera. ▪ TYPE: Displays the PTZ protocol list. NOTE : baud rate, data bit, parity, stop bit, ID and protocol depend on PTZ camera you are using. CAUTION : When connecting the camera to the RS-485 port, refer to the manufacture’s manual.
5.2.3 SPOT CAMERA: Select the camera for display on spot monitor. DEFAULT: Select the camera for display on spot monitor when sequence is off. SEQUENCE: Select On/Off for sequence screen. INTERVAL: Select the sequence dwell time. Maximum 256 sec. POPUP: Select On/Off for pop-up alert when event occurs.
5.2.4 SEQUENCE PAGE DWELL TIME: Select the page dwell time. CAMEO DWELL TIME: Select the dwell time for CAMEO sequence.
5.2.5 PRIVACY ZONE ▪ ZONE ENABLE: Select On/Off to use. (LIVE mode/ SEARCH mode) ▪ ZONE COLOR: Select the color of privacy zone area. ▪ ZONE: Select the zone. NOTE: Move the blue selection area to the desired location and press enter. Drag and move it to include the desired area and press enter. As a result the area is covered and hidden with the selected privacy zone color. TIP: On the screen click the right button of the mouse and the menu will appear. Using this menu the area can be deleted or saved.
5.3 EVENT SETUP In this menu is Motion, Alarm input, Video Loss, System and Display setup. Select the [EVENT] menu. 5.3.1 MOTION [INPUT] ▪ ACTIVE: Select On/Off to activate motion detection. ▪ LEVEL: Select the sensitivity level for motion detection. (Select 1 to 5 level) ▪ AREA: Select the motion detection area. TIP: If you select the ACTIVE+ / LEVEL+ / AREA+ menus you can change all camera settings.
▪ AREA SETUP In the Area setup, the highlighted square is shown at the left top side of the screen. Press enter and the active area will be change to Green. Cover desired areas with active green color for motion detection. NOTE : When the highlighted square is red you can freely move the selector to the desired area. When the status active green color you can add or delete motion detection areas. After setting the motion area select the MENU button to save your selection.
[ACTION] ▪ RECORD: Select the channel for record. ▪ ALARM: Select On/Off for alarm. ▪ BUZZER: Select On/Off for buzzer. ▪ PRESET: Set the preset number. (When motion is triggered, the PTZ camera can move to a preset position) ▪ E-MAIL: Select On/Off for e-mail notification.
5.3.2 ALARM IN TIP: If you select the ACTIVE+ or TYPE+ menu you can change all settings at one time. [INPUT] ▪ ACTIVE: Select On/Off to activate alarm. ▪ NAME: Name alarm input. ▪ TYPE: Select the alarm type. (NO : Normal Open / NC : Normal Close) [ACTION] ▪ RECORD: Select the channel for record. ▪ ALARM: Select On/Off for alarm. ▪ BUZZER: Select On/Off for buzzer. ▪ PRESET: Set the preset number.
5.3.3 VIDEO LOSS TIP: If you select the ACTIVE+ menu, you can change all setting at once. [INPUT] ▪ ACTIVE: Select On/Off to activate. [ACTION] ▪ RECORD: Select On/Off for record. ▪ ALARM: Select On/Off for alarm. ▪ BUZZER: Select On/Off for buzzer. ▪ PRESET: Set the preset number. (When motion is triggered the PTZ camera can move to a preset position) ▪ E-MAIL: Select On/Off for e-mail notification.
5.3.4 SYSTEM [WARNING] ▪ CHECK INTERVAL: Select the check interval time. (Select 1 hour to 24 hour) ▪ DISK WARNING: Select the option for smart warning. (POPUP + BUZZER / POPUP / OFF) ▪ ALARM WARNING: Select the alarm out channel for Alarm warning. ▪ THRESHOLD: Select the warning temperature. (C: 0 to 100 / F : 32 to 212) ▪ CURRENT TEMP: Display current temperature. [DISK] ▪ DISK FULL WARNING: Select On/Off to disk full warning. ▪ USED SPACE: Display the used space.
[MAIL] – Select option On/Off for e-mail notification. ▪ POWER / MENU / LOGIN FAIL / DISK FULL / LOG IN / SMART [E-MAIL] ▪ Select On/Off to send e-mail notification with each item. (Power On & Off, Menu Change, Login Fail, Disk Full, Log in and SMART information. 5.3.5 DISPLAY ▪ DISPLAY: Select display time by second. (Select 0 to 100) ▪ EVENT ICON: Select On/Off to display event icon. ▪ EVENT POPUP: Select On/Off to pop-up.
5.4 RECORD SETUP In this menu is the Resolution, Schedule, Record, Audio, Manual, Filter setup. Select the [RECORD] menu. 5.4.1 RESOLUTION ▪ RESOLUTION: Select the resolution per channel.
5.4.2 SCHEDULE ▪ SETUP MODE: Select the recording schedule. (TYPICAL / CUSTOM) ▪ DAY TIME: Select the day time schedule time. (Night time is automatically set according to day schedule) ▪ WEEKEND: Set the weekend days. [CUSTOM] ▪ 3 different recording schedules can be setup. (REC1, REC2, REC3) This is related with the [RECORD] menu so [CUSTOM] mode should match the [RECORD] menu.
5.4.3 RECORD [DAY] / [NIGHT] / [WEEKEND] ▪ TIME: Set the frame rate and resolution per channel for time based recording. ▪ EVENT: Set the frame rate and resolution per channel for event based recording. TIP : The frame rate can be set by the directional button in the setup menu. If set to [Typical] in [SCHEDULE] menu, the DAY / NIGHT / WEEKEND schedules and settings will be changed to REC1/ REC2 / REC3.
5.4.4 EVENT ▪ PRE RECORD: Select the pre recording time by second. (0 ~ 60 SEC) ▪ POST RECORD: Select the post recording time by second. (0 ~ 100 SEC) 5.4.5 AUDIO ▪ RECORD : Select On/Off for audio recording per channel. TIP: If you select the RECORD+ menu all setting you can be changed at once.
5.4.6 MANUAL ▪ SPEED: Select the recording frame rate per channel. ▪ Quality: Selects the compression quality per channel. ▪ AUDIO: Select On/Off for audio recording per channel. *Please Note: When selecting live audio option in the Cameo menu select “AUDIO ON” to turn on live audio function, select “AUDIO OFF” to turn off the live audio function.
5.5 ETHERNET SETUP Network, Serial, DDNS, E-mail setup. Select the [ETHERNET] menu. 5.5.1 NETWORK [ETHERNET] ▪ DYNAMIC IP: Select On/Off for dynamic IP. If Dynamic IP is ON, DVR IP address is assigned automatically from your router. ▪ HOST NAME: Type any Host name. ▪ IP ADDRESS: Type IP address. (Available when DYNAMIC IP is OFF) ▪ SUBNET MASK: Type Subnet mask. (Available when DYNAMIC IP is OFF) ▪ GATEWAY: Type Gateway. (Available when DYNAMIC IP is OFF) ▪ DNS SERVER: Type DNS server.
5.5.1 NETWORK [CLIENT] ▪ CLIENT ACCESS: Select client access options. ( ALL / RANGE ) ▪ BEGIN ADDRESS / END ADDRESS: Enter range of IP addresses with remote access. (If you select range you must Input the acceptable IP address range for remote access). ▪ SMS PORT (TCP): Select SMS port. ▪ WEB PORT (TCP): Select Web port. ▪ REMOTE RESTART: Select On/Off to restart DVR remotely. ▪ REMOTE CONFIG: Select On/Off to remotely change configuration.
5.5.2 SERIAL [RS-232 INPUT SETUP] ▪ SERIAL TYPE: Select external device. ▪ MODEL: Select the protocol to use. ▪ PORT: Select the Baud Rate / Data bit / Parity / Stop bit. [RS-485 INPUT SETUP] ▪ SERIAL TYPE: Select external device. ▪ MODEL: Select the protocol. ▪ PORT: Select the Baud Rate / Data bit / Parity / Stop bit.
5.5.3 DDNS ▪ DDNS SERVER: Select the DDNS server. (Ddnsdvr.com / Dyndns.com / ChangeIP.com) ▪ HOST NAME: Input the host name from the registered DDNS server. ▪ USER NAME: Input the user name from the registered DDNS server. ▪ PASSWORD: Input the password from the registered DDNS server. ▪ ROUTER IP : Select On/Off for sending IP information to the DDNS server. If using a router this setting should be [ON]. ▪ STATUS: Check the connection status.
5.5.4 E-MAIL [ADDRESS] ▪ SEND E-MAIL: Select On/Off for email notifications. ▪ SCHEDULE: Set the notification schedule. (From : Start time / To : End time) ▪ E-MAIL ADDRESS: Input the E-mail address to receive notifications. [SERVER] ▪ MAIL SERVER: Select the mail server. (SMTP server / DVR System) ▪ E-MAIL: Input the user e-mail address. ▪ PASSWORD: Input the Login password. ▪ SMTP SERVER: Input the server address. ▪ SMTP PORT: Input the server port. ▪ MAIL TEST: Send test mail.
5.5.5 NET FRAME ▪ FPS: Select the frame rate per channel for network transmission. ▪ QUALITY: Select the image quality per channel for network transmission.
5.6 SYSTEM SETUP System Log, Status, Version. Select the [SYSTEM] menu. 5.6.1 SYSTEM LOG ▪ Check the system log with the left and right directional buttons.
5.6.2 STATUS [DISK] ▪ HDD INFORMATION: Displays the HDD status. Note: DVR will check the HDD for bad sectors automatically and skip these sectors for reliable recording.
5.6.2 STATUS [RECORD] ▪ Display RECORD Status. [AUDIO] ▪ Display AUDIO Status.
5.6.3 VERSION ▪ Display DVR version and information. 5.6.4 UPGRADE ▪ TYPE: Select the upgrade type. (FTP or Media) ▪ DEVICE: Select the device which contains the upgrade firmware file. (DVD / USB) ▪ CONFIRM: Select On/Off for upgrade confirm message. ▪ UPGRADE: Start upgrade.
6. SEARCH On the Top menu, select the [SEARCH] menu. After selecting this menu the following Log-in window will appear. Enter the password and press the ENTER button. (The default password : 1111) ▪ QUICK SEARCH: Search by date, hour and minute details. ▪ CALENDAR: Search by date and time. ▪ EVENT SERARCH: Search by event type. ▪ OVERLAPPED LIST: Search data effected by time and date changes. ▪ MUSEUM SEARCH: Search by the selected area activity. ▪ GO TO FIRST: Search the oldest saved data.
6.1 Search Screen Configuration Execution Information Message Camera Name Search Information Icon Search Icon Search Screen Repeat Time Information Screen Expand/Reduction Window Backup Progress (%) Recorded Audio Information Icon Search Date/Time 6.1.1 Search Menu When mouse cursor is placed over on the bottom side, the Search menu is appeared.
6.1.2 CALENDAR SEARCH a. Select the date and time data. ▪ Recorded data is then displayed in the timeline. b. Select the start hour and minutes ▪ After hour selection is made the minute timeline will appear. NOTE: The time graph color is different by the recording type. Continuous Recording = Blue, Audio Recording = Light Blue, Event Recording = Red.
6.1.3 EVENT SEARCH ▪ DATA: Select date to search. ▪ MOTION: Select On/Off event for search. ▪ ALARM IN: Select On/Off event for search. ▪ VIDEO LOSS: Select On/Off event for search. ▪ SELECT CAMERA: Select the camera for search. ▪ VIEW SEARCH LOG: Display selected event log. ▪ HOUR: Select time period to view. ▪ PREV: Display previous page. ▪ NEXT: Display next page. ▪ GOTO: Display the video data per event.
6.1.4 OVERLAPPED LIST ▪ If a user changes the time or applies DST (Daylight Saving Time) there will be an overlap in data. ▪ Search options are [QUICK SEARCH] or [EVENT SEARCH].
6.1.5 PANORAMA SEARCH ▪ During normal search press the [PANORAMA] button. ▪ By clicking the right mouse button and select [PANORAMA] Search. ▪ Playback frame by frame. 6.1.6 SECTION REPLAY LOOP ▪ During normal search, press the pause button or click the repeat loop button. ▪ When loop icon is selected the starting point is set, select the loop icon again to set the end point for loop. ▪ In playback you will see the replay icon and time signature.
6.1.7 MUSEUM SEARCH ▪ Select [MUSEUM SEARCH] function menu. ▪ Select the Museum search area.
6.1.7 MUSEUM SEARCH ▪ Select the start and end time then select SEARCH. ▪ Preview event list will appear. ▪ Select the event for playback.
▪ Button Functions Search mode ▪ Remote Controller or Front button Button SEARCH ESC Explanation Display the [SEARCH] menu Cancel the Search mode or return to the live screen ENTER Select the CAMEO menu FAST REVERSE Reverse playback speed FAST FORWARD Forward playback speed PAUSE Pause playback FORWARD PLAY Playback REVEERSE PLAY Reverse playback DISPLAY Display screen split options (1,4,9,16) 66
7. BACKUP From the menu select the [BACKUP] icon. After selecting the menu you will need to login. Enter the password and press the ENTER button. (The default password : 1111) ▪ TARGET: Select the device to backup. (USB / DVD) ▪ FROM: Select the start date and time. ▪ TO: Select the end date and time. ▪ BACKUP TITLE: Type title. ▪ SELECT CAMERA: Select the camera for backup. ▪ EARLIEST RECORD: Displays the oldest recording data. ▪ LATEST RECORD: Displays the most recent recording data.
7.1 DVR Player ▪ During backup the DVR Player is copied to the media with the data. ▪ Backup data can only be played using DVR Player, SMS or the DVR. ▪ Export to JPEG still shot or AVI file from backup DVR Player.
8. APPENDIX 8.1 Firmware Upgrade 1. Copy the firmware on USB and connect to the USB port. Memory Stick 2. For upgrades restart the DVR. 3. After restart the upgrade window will appear, select the START button. 4. After upgrade remove the USB and select ok. Then the DVR will restart. ▪ NOTE: If you select OK without removing the USB device the DVR upgrade process will start again. 5. After restart you can verify the upgrade process.
8. APPENDIX 8.2 Web Client ※How to connect For using web connection through internet, ports 7000 and 80 should be forwarded in the router to the DVR IP address.. 1. To connect Web viewer, the [Ethernet] setup on DVR is required. 2. Input the IP address or Domain name of DVR • • • http://210.58.xx.xx. http://test.ddnsdvr.com In case of other Web port, input the address as http://test.ddnsdvr.com:XXXX ( ‘XXXX’ is assigned web port number) 3.
8.2.
8. APPENDIX 8.3 Specification Model DRL1600 Performance PENTAPLEX Display Speed (NTSC / PAL) DRL800 DRL400 480 / 400 fps 240 / 200 fps 120 / 100 fps D1(704*480)/(704*576) 120 / 100 fps 120 / 100 fps 120 / 100 fps 2CIF(704*240)/(704*288) 240 / 200 fps 240 / 200 fps 120 / 100 fps CIF (352*240)/(352*288) 480 / 400 fps 240 / 200 fps 120 / 100 fps Signal Level 1.
8. APPENDIX 8.5 Trouble Shooting Symptoms No Power No Camera Images Action If the power LED is not illuminated, check the items below. - Check the power cord connection to the wall outlet. - Check to power cord connection to the DVR. - Check video cable connection to the DVR. - Check the monitor connection to the DVR. - Check the camera power connection. - Restart the DVR in case of possible boot error . - Restore default configuration settings. ※ How to restore default configuration settings. 1.
No IR remote control No live audio - Check the battery installation. Check the ID of the IR remote control. Point the IR remote control at the DVR system. Use the remote controller within 15 feet of DVR. Install new batteries. - Check the microphone and audio cable connections. - Check the audio output connections. - Turn on the Live Audio for the individual camera channel. * Individual camera menu will be appear with right click of mouse.
8. APPENDIX 8.6 Mobile Viewer (Apple & Android) - Download the Talos Connect App for iPhone or iPad (Free software) - Download the Talos Connect App on Google Play. (Free software) - Open the Talos Connect App and the connection list will appear. - Press the [+] button to setup a new DVR connection.
8.6 Mobile Viewer (Apple & Android) -. Enter the DVR remote connection information. - press the button after all fields have been completed. - From the DVR site list menu select DVR for connection. - ADD : Press the button for additional DVR registration. Enter all DVR information then press the button. - EDIT : Press the 76 button to delete or modify information.
8.6 Mobile Viewer (Apple & Android) - Support 1,2,8,16 split screen. - Double touch the cameras to change to single screen or multi screen view. - Horizontal and Vertical viewing is supported. - : Exit application. - : Playback by date / time. After selecting date and time press the : Returns to live mode. - button to start playback.
8.6 Mobile Viewer (Apple & Android) - App functions: Image capture: Saves JPEG image of single camera view Pause: Pause (freeze) live view Paused Icon: Press this button to enable or disable pause function Screen Split: Select single channel, 2, 4, 8, or 16 Screen splits. PTZ: Enables PTZ camera control Camera moves with directional arrow indicator.
