Instruction Manual

ISS User Manual
14
3.3.6 Group Channel Configuration
After adding the group, the channels in the list area can be moved to the selected
group.
Add Channel: Click the group name which wants to add channel, select channel in the list
area and click button to move it to the group. As shown below:
Fig 3-12
Delete Channel: Select channel in the group area and click button to remove it
from the group; or right click the channel name, select “Delete Channel” to delete it.
Note: One channel can be added to different groups, yet one group cannot add
the same channel repeatedly. As shown below:
Fig 3-13
Note: The total number of channels supported by ISS is 4096. The number of
device channel is the number can be added to each group. So, a group can be
assigned to 4096 channels at most.
3.4 Local Config
Click “Config”→“Local Config” to enter the local config page. Refer to Fig 3-14:
In this interface, click “Browse” button to change the save path of local snap, data
backup and local record, set up the packing time of local record and the holding time of
alarm log, operation log.