Instruction Manual

ISS User Manual

Fig 3-14 Local config interface

3.5 Remote Config

Click “Config”→“Remote Config” to enter the remote config page.

Double-click the device which needs to be configured in the list area. User can

configure the device remotely after system reads the device’s configuration successfully.

Fig 3-15(a) shows the IP Camera’s remote config main interface, Fig 3-15(b) shows the

DVR’s remote config main interface.

Note: Only the device with a successful connection can be configured

remotely. While other users are configuring the device, you will not be able to

access this device’s remote config interface, please try again later.

Note: The devices with different types or models have different remote config

interface. The figures provided are only for illustration; please refer to the actually

displayed interface as final.

Note: Users with remote config authority can enter into the remote config

interface, otherwise it will prompt you have no operating authority.