Instruction Manual

ISS User Manual
46
Click Modify button to enter the Setup Preset window, as shown in Fig 4-7. User
can set the preset points displayed in the list, and modify the serial number and name of
preset, click “Apply” button to confirm the change.
Fig 4-7
3) Patrol
Click “Patrol" tab of PTZ control panel, it supports 8 patrols; refer to Fig 4-8:
Fig 4-8
a) Select a patrol line and click Run button; PTZ rotates on a timed interval, in
accordance with the configured preset sequence; click Stop button to stop
PTZ patrol.
b) Click Add button to enter the Setup Patrol window, as shown below: