RMS User Manual
1. Introduction 1.1 Introduce This SW can manage and control several DVRs from Remote site through network at the same time. This SW provides live image monitoring, Playback and DVR configuration. 1.2 Features The SW can manage 16CH devices and support 16Ch live view simultaneously. Supported functions are z z z z z z z 2way Audio Relay control PTZ control Preset configuration and movement. Focus control of camera.
2. Installation 2.1 System Requirement Below is the minimum requirement of PC specification to run the SW properly. System CPU Memory VGA memory VGA display HDD OS others Minimum requirement Intel Core2Duo 2.0GHz or higher 2GB or higher 128MB or higher 1024 * 768 (With 32bit color) or higher 80GB or higher Windows XP SP2 or higher Direct X 9.0 or higher 2.2 Steps to install 1. Insert a provided CD to CD or DVD rom. 2. Click ‘Setup.exe’ file to start installation. 3. Select a Language 4.
3. How to use 3.1 Register site After Run the SW, User must register devices that want to control from this SW. 3.1.1 Steps to register devices 1. Select buttons then select ‘Server manager’ item 2. Server manager window will be appeared. 3. User can Add, Modify and delete servers. 4. Press [Add] button. 5. Input proper information. Server Name: Site name for SW. Description: information or note for Site. Connection Address: IP address of DVR. Port: Port number for remote connection.
7. Press [Delete] to discard site information. 3.2 Register Group A Group function allows user to select several camera from different DVR and assign one screen. This Group can contain maximum 16 different cameras. 3.2.1 Steps to register group buttons then select ‘Group manager’ item 1. Select 2. Group manager window will be appeared. 3. Press [Add] button. 4. Input Group name and Description. 5. Select screen mode between 4, 9 and 16 channel mode.
. Drag and Drop a camera from List of Left window then positioned camera at Right panel window. 7. Press [Save] button when complete set position all cameras. 8. User can modify and delete register group through Group manager window. 9. Press button to select a group or device from the list. 3.3 Connect device. User can connect devices one by one or Group device. Maximum 16 DVR can be connected simultaneously. 3.3.1 Connect from the server list. 1. Press buttons and select [Sever list] 2.
4. Press 3.3.2 buttons to close a connection. Connect from the group list 1. Press buttons and select [Group list]. 2. Select a Group from the list that wants to connect. 3. Start to live image display. 4. Press 3.3.3 buttons to close a connection. Connect devices manually 1. Press buttons and select [Manual].
2. Select a channel mode between 4,8,16 mode. 3. Drag and drop a camera from device list to right screen panel. 4. Press [Connect] button. buttons to close a connection. 5. Press *The manual connection information for camera position will not be saved. If user wants to keep this configuration of screen, register a new group on [Group Manager] window. 4. Live View 4.1 Live View window. Live View window will be available after make a connection through [Server List], [Group List] and [Manual].
4.2.3 Live zoom 1. User can use digital zoom at selected camera on Full screen mode. 2. The Zoom In ratio can be select between 100% to 1600%. 4.3 Functions on live view Live view supports PTZ control, Relay control and 2 way Audio. 4.3.1 PTZ control PTZ control will be available when the connected camera support Pan, Tilt and zoom function. And also control focus, Preset, Speed of movement and Tour function. PTZ Control 1. Select a channel that connected PTZ camera. 2.
2. Press button to run saved route of PTZ movement 3. Press button to run saved route of PTZ movement 4.3.2 Relay Out Control Users can control the relay out that connected to DVR. User can do activate and deactivate of Relay device remotely. 1. Select a site from the device list. 2. Press buttons to set action as On/Off. (Off) / (On). 3. Display as 4. Time out of relay control set as 5 sec. so next command will be activated after 5 sec. 4.3.
4.4.2 Color setting Users allow adjusting the live channels color. button and select [ Color Adjust] 1. Press 2. Set proper value on [Adjust color & Post processing] window. 3. User can adjust Brightness, Gamma, Contrast, Saturation and tint. 4. With [All] option, user can apply same adjustment to all camera at the same time. 5. The color adjustment will not be saved. Next login will contain default value. 4.4.3 Screen Sequence The screen can be changed as sequence with term. 1.
3. The image will be save as Jpeg format file. 4.4.5 Digital Zoom User can zoom in the selected channel. 1. Select one of the channel then press button. 2. Move the Red color rectangle to proper position then scroll up the mouse wheel. 3. The maximum zoom ratio is 1600 % 4. 4.4.6 Full Screen The live view window will be full sized up to PC monitor.
1. Press buttons. 2. Press ESC button to restore the screen. 5. Playback 5.1 Remote playback The network player supports to retrieve a recorded data from DVR on remote PC. 5.1.1 Control panel for playback. Buttons Description Fast backward playback Backward playback Previous frame Pause Next Frame Forward playback Fast forward playback. Move to previous time line Move to next time line Speed control for playback Audio control box 5.1.2 Play from recording file 1. Select Playback tab on SW. 2.
z z The Backward playback is available only at 1ch full screen mode with 1 frame per each second. Maximum 16Channel can be playback at the same time. 5.1.3 ‘Go to’ function 1. Select a date and time. 2. Press 5.1.4 button to playback directly from the selected start time point. Searching recording data 1. Press button on playback screen. 2. Select Search item on menu. 3. The calendar will be indicated different color when they have recording data. 4. Select a day from a calendar. 5.
7. To select a minute based time line. Press playback button one more. 5.2 Backup Recoding image and audio from the DVR can be saved at remote PC. 5.2.1 1. 2. 3. 4. 5. Remote backup Press button then select [Download] item on menu. Select start / end date and time. Select channels for backup Set a path for backup on PC. Press [Start button] button to start download data from DVR. 6. Remote Upgrade 6.1. Remote upgrade This SW will provide a function to upgrade the DVR with latest FW remotely.
6.2. Start Remote upgrade 1. Press button and select [Remote Upgrade] item on menu. 2. Below Remote Upgrader will be appeared. 3. Input DVR’s information that needs to be upgraded. (IP address, Port, User ID, Password) 4. Select a upgrade file (*.bin). 5. Press [Upgrade] button to start upgrade procedure. 6. After complete uploading the FW to DVR. DVR will start upgrade the system automatically. *DVR must be installed HDD before remote upgrading. 7. DVR setup Manager 7.1.
4. Press [ Send] after complete configure to apply all modified configurations to DVR. 7.3. Save & Load Configuration file 1. 2. 3. 4. Select [Open] on file menu. Select a saved configuration file. Modify any values then saved the file as [save] or [save as]. Press [Send] to apply modified values to DVR. 7.4. Configuration initialize /Factory default 1. 2. 3. 4. Select [Setup Data Reset] from file menu. All values will be initialized on configuration file.
