Manual

9. Security Device Setup Administrator
9.1 Security Device Setup Administrator Overview
Security Device Setup Administrator is to setup security devices from a remote PC directly. The
administrator can save a setup value and apply it to other security devices to make the same
configuration. The administrator can open and edit a setup value file.
9.2 Start of the Security Device Setup
1. Select button in Tool Bar.
2. Users can change a setup value of the security device by using Security Device Setup
Administrator.
3. After changing setup values, press ‘Send’ button’ and the changed setup value applies to the
security device.
9.3 Open/Save Setup Value
1. Go to ‘Open’ in ‘File’ menu and select a file.
2. After changing setup values, select ‘Save’ or ‘Save as’ in ‘File’ menu and save the setup value.
3. Press ‘Send’ button’ and changed setup values apply to the security device.
9.4 Setup Data Reset and Factory Default Reset
1. Press ‘Setup Data Reset’ in ‘File’ menu, all changed values reset to the initial setup value.
2. Press ‘DVR All Reset’ in ‘File’ menu, all values reset to the factory default value.
3. After changing setup values, press ‘Send’ button’ and changed setup values apply to the
security device.