Uni-GR Channel Ground\Roof Mount Installation Manual 2016 Edition v1.
Installation Manual Ground\Roof Mount Table of Contents 1 Introduction 1 Customer Support 2 Project Essentials 3 4 Assembly: Steps 1-2-3 Assembly: Steps 4 5 Installer Responsibility 5 Warranty Information Introduction The Universal Ground\Roof Mount is a simple and universal mounting solution for small area solar photovoltaic (PV) needs. With its user-adjustable angle settings, the Ground\Roof Mount can support installations in a wide range of locations, as a standalone or multiple mounts inte
Installation Manual Ground\Roof Mount Tools Required 1/2" wrench\socket for 5/16 hex bolts and flange nuts, Torque to 132 inch Lbs. Dry, or 112 inch Lbs. lubricated. Components List The following parts are used across the 4 models of our channel Ground\Roof Mount including necessary hardware: info@ | tamaracksolar.com | (800) 819-7236 2 2016 v1.
Installation Manual Ground\Roof Mount Step 1. Determine foot spacing A. For the front to rear distance, loosely assemble the “A” frame section as shown on page 2, adjust the rear leg maintaining the minimum 6” overlap (or more) to support the panels at the desired angle to the sun and keeping the rear leg within 45° to 60° to the panel supports. B. For the side to side spacing it is equal to the center to center distance of the mounting holes on the PV module. Step 2.
Installation Manual Ground\Roof Mount Step 4. Foot attaching options info@ | tamaracksolar.com | (800) 819-7236 4 2016 v1.
Installation Manual Ground\Roof Mount Step 5. Multiple Mount Intertie Assembly Using (Optional Kit# 51-0520-002) A. Determine spacing between mounts, multiply times two, the distance from the edge of the panel to center of the mounting hole and add 1 inch. B. Install mounts and panels per previous steps. C. Install Intertie bracket assembly in between the mounts info@ | tamaracksolar.com | (800) 819-7236 5 2016 v1.
Installation Manual Ground\Roof Mount Installer Responsibility The installer is solely responsible for: i. Complying with all applicable local or national building codes, including any that may supersede this manual; ii. Ensuring that Tamarack Solar and other products are appropriate for the particular installation and the installation environment; iii. Using only Tamarack Solar parts and installer-supplied parts as specified by Tamarack Solar. Substitution parts may void the warranty; iv.