PGRM Series Specs

amarack Solar
Products
am
a
a
P
r
[e-mail] 800-819-7236
1435 Baechtel Road, Willits CA
•  e PGRM Series Pole Mount can be used to mount up to 6
solar modules with a frame thickness between 1.18” and 2”
• Install up to 92 square feet of modules on a single 4” Schedule
40 pole and up to 130 square feet of modules on two 4” sched-
ule 40 poles
• Suitable for wind speeds up to 115 MPH
• For high wind locations add an additional vertical pole
• Tilt angle can be adjusted from 0° to 60° and is easily adjusted
seasonally
• All sizes can ship by UPS Ground
• Simple one-person installation and adjustment
PGRM POLE TOP MOUNT
User supplies 4” schedule 40 steel pipe(s) for vertical pole and a 3” schedule 40 steel pipe for
the horozontal beam.
Calculation of the required horizontal beam length (L) in inches:
L = W x N + (N + 1) x 1.4 where N = number of modules and W = module width in inches
Part Number Description
UNI-PGRM/1P1 POLE MOUNT FOR 1 MODULE WITH 1 VERTICAL POLE
UNI-PGRM/2P1 POLE MOUNT FOR 2 MODULES WITH 1 VERTICAL POLE
UNI-PGRM/3P1 POLE MOUNT FOR 3 MODULES WITH 1 VERTICAL POLE
UNI-PGRM/4P1 POLE MOUNT FOR 4 MODULES WITH 1 VERTICAL POLE
UNI-PGRM/5P1 POLE MOUNT FOR 5 MODULES WITH 1 VERTICAL POLE
UNI-PGRM/5P2 POLE MOUNT FOR 5 MODULES WITH 2 VERTICAL POLES
UNI-PGRM/6P1 POLE MOUNT FOR 6 MODULES WITH 1 VERTICAL POLE
UNI-PGRM/6P2 POLE MOUNT FOR 6 MODULES WITH 2 VERTICAL POLES
70-0300-PGM ADDITIONAL POLE CAP FOR HIGH WIND LOCATIONS