Flush Mount Installation Guide
2019 TAMARACK SOLAR - REVISION G FLUSH MOUNT MANUAL
3
Tamarack Flush Mount System Features
• Designed for mounting on most residential roofs
• Can be installed with most available roof attachments for composition shingle, tile and metal roofs
• Only 4 tools required for installation
• Top clamps and rail attachments require the use of a single standard 1/2-inch socket
• One part for both mid-clamp and end-clamp use simplies ordering and stocking parts
• Module clamps are spring loaded to ease module placement
• Two rail heights and one rail length
• Bonding splice installs easily without tools
• Built-in wire management for module and microinverter cables
• Sleak low-prole design eliminates the need for an array skirt
Tamarack Product Summary
Flush mount is a visually appealing, low prole, photovoltaic (PV) module installation system that signicantly
lowers PV module installation cost by allowing the installation professional to stock fewer parts and to com-
plete the installation in less time.
Certied to meet local and International Building Codes when installed in accordance with this manual. The
design load rating meets the minimum requirements of 10 PSF downward pressure, 5 PSF upward pressure and
5 PSF down-slope load. Module orientation may be portrait or landscape. Designed for use with most third-
party roof attachments including Solar Roof Hooks, Quick Mount PV, Ironridge Flashfoot, S-5 Clamps, etc.
Class A Fire Rating per UL 1703 for steep roof slope applications when
using Type 1 or Type 2 Listed Photovoltaic Modules. This is per Middle-
ton re test report 103427989MID-004.
ETL Listed to UL 2307 for bonding and grounding when installed in ac-
cordance with this manual.
Rails, clamps, splices and mounting devices are UL2703 Listed for
mounting at-plate Photovoltaic Modules and Panels
5014275