Ground Mount Rail System Data Sheet

• Kits contains all parts required except 2-inch schedule 40 pipe

and concrete

• UPS shippable

• Choose one starter kit for rst column of

3 or 4 modules

• Expand with up to 7 add-on column kits

• Mount up to 64 modules on a single

structure.

• Mount 60 or 72 cell modules with frame

thickness between 30mm and 40mm

• Rated for up to 170 MPH wind speed and

50 psf of snow load

• Some situations require cross bracing (see sizing chart)

• Sites with greater than 15 degree slope may require additional engineering

certication

Best Wire Management - PV cables and wiring for module-level electronics ts

inside rails to avoid time consuming wire management.

UL 2703 Listed - All components meet the UL standards and have a Class A

Fire Rating for Type 1 and 2 modules.

PE Certied - Pre-stamped engineering letters available for most states.

Save Time and Money

Low-cost rail-based PV module mounting system

provides easy installation, simple wire management,

great strength and economical shipping

GROUND MOUNT KITS

PAGE 1
GROUND MOUNT KITS Save Time and Money Low-cost rail-based PV module mounting system provides easy installation, simple wire management, great strength and economical shipping • Kits contains all parts required except 2-inch schedule 40 pipe and concrete • UPS shippable • Choose one starter kit for first column of 3 or 4 modules • Expand with up to 7 add-on column kits • Mount up to 64 modules on a single structure.
PAGE 2
Tamarack Ground Mount Kit Sizing Kits are available for systems with either 3 or 4 modules per column. Use a First Column Kit and up to 7 Add-On Kits. Find the wind speed and snow load required for your location and tilt angle. Green or yellow boxes on the chart at right note compatibility with 60 cell or 72 cell modules. Orange squares note compatability with 60 cell modules only. Red boxes require custom mount design. Yellow, orange boxes require North/South cross braces.