User Guide

For installations without a wall switch:
Twist the two Red wires from the HV1000 and the remote receiver (inside the
black box) together with the incoming line HOT and secure with a yellow wire
nut. Twist the three White wires from the HV1000, the remote receiver and
the incoming line NEUTRAL together and secure with a wire nut. Twist the
two Black wires from the HV1000 and the remote receiver together and
secure with a wire nut. (Figure 4)
Figure 4
For installations with a wall switch:
Please refer to the HV1000 Installation Manual for wiring instructions for
the switch. Twist the three Red wires from the HV1000, the remote receiver
(inside the black box) and the incoming CONSTANT HOT together and secure
with a yellow wire nut. Twist the three White wires from the HV1000, the
remote receiver and the incoming line NEUTRAL together and secure with a
wire nut. Twist the three Black wires from the HV1000, the remote receiver
and incoming SWITCHED HOT and secure with a wire nut. (Figure 5)
Figure 5
Install the cover on the black box.
Install the cover on the junction box.
(Figure 6)
Figure 6
320 Main Street, Buzzards Bay, MA 02532
508-759-4660 / Fax 508-759-6001