Installation Guide

Select Fan Location

When selecting a location to install the Dragon fan, take into consideration the

application of the product, the locations of fresh air intakes, and sound generated

by the Dragon unit. If ductwork is to be used, consider the path of the ducting

material.

Thefanshouldbelocatedaminimumof6feethorizontallyand8feetvertically

from any fresh air intakes for HVAC systems, heat recovery systems, etc. to

prevent exhaust air streams from being re-introduced into the occupied space.

Doors or windows that are frequently opened during pleasant seasons may also

be considered fresh air intakes so keep this in mind when selecting the location

of the Dragon.

Locate Mounting and Through Holes

Once the location on the exterior wall where the fan is to be mounted has been

selected, mark all screw and hole locations utilizing the included template. Cut

the holes through the wall for the duct connection and for the electrical conduit.

Measurethethicknessofthewallandthelengthoftheductangethatispart

of the Dragon fan. Cut a length of duct (not supplied) so that once connected to

theductange,itwilleliminateairleakageintothewallcavity.Attachgrilleorfan

guard (not supplied) to prevent objects from entering ductwork and fan.

If mounting the fan on a masonry wall, drill four holes and insert wall anchors. If

mounting to wooden structure, you will utilize wood screws to secure the Dragon

tothewall.Ifthefanistobemountedonawallsurfacewhichisnotushsuch

aslappedsiding,amountingplatetoprovideforaushtneedstobemade.

Mount the Fan

Insert electrical supply through the wall. Attach the duct extension to the Dragon

making sure that the connection is secure. Apply a generous amount of exterior

silicone caulk (not supplied) to backplate of the fan to ensure an airtight/

waterproof connection between the fan and the wall surface. If a mounting frame

is used in conjunction with lapped siding, be certain to apply a generous amount

of caulk between the frame and the wall as well as the fan backplate and the

frame. Mount the fan to the wall.

Note: Be certain to make an airtight seal around all interior wall penetra-

tions before attaching duct work.

Electrical Connection

AllDragonseriesfansoperatefromastandard120V60HzA.C.electricalsupply.

All wiring must be carried out in accordance with applicable state and local