Instructions / Assembly

SAFETY INFORMATION
Never operate this fan without a window or door opened.
This fan is meant for general ventilation. DO NOT USE THIS FAN TO VENTILATE PARTICLE-LADEN
AND/OR EXPLOSIVE MIXTURES OF AIR.
Do not use this fan for kitchen ventilation.
NEVER force open the Powered AirLock’s doors as this could severely damage its actuators. ALWAYS use
the yellow clutch releases located on the actuators before attempting to manually open or close
the doors.
Before installing or servicing this fan, disconnect it from power to reduce the risk of damaging
circuitboards,re,electricalshock,orinjury.
Install this fan in accordance with this manual and all local codes and standards.
Some of the principles of this product’s safe installation and operation
are not immediately obvious. Read the following safety information
before continuing further:
ElEctrical rEquirEmEnts
This fan requires a 120 volt uninterrupted electricity supply. We strongly recommend providing a
dedicated circuit for this fan.
This fan has a factory-installed 10 ft. power cord that originates at the fan-mounted electrical box. Consider this
length when choosing a location for this fan. Depending on the location of existing outlets in the attic, the installation
of an additional outlet may be required.
All wiring and connections must be made according to this manual and acceptable wiring standards. All
local codes must be followed. Consult an electrician if necessary.
This fan’s aluminum construction is corrosion-resistant and extremely durable. However, this fan should never be
handled using any of the aerodynamic brackets that mount the motor within the assembly. These brackets are
highlighted in the illustration below. Always
handle this fan by either its external casing or the motor itself. You can
also handle this fan by its hanging straps, but be careful as their edges are sharp.
HANDLING INSTRUCTIONS
NEVER handle the
fan using any of
these brackets.
Page 2
Tamarack HV5800M Whole House Fans Installation Manual, P/N HV5800M.1
©Tamarack Technologies, Inc., 2018. All Rights Reserved.