Instructions / Assembly
installation: Framing
Usingappropriatelysizedlumber(e.g.2"× 6",
2"× 8",etc.)cuttot,frameinaroughopening
from the living space into the attic as shown at
right. Cut out the drywall inside of the framing
to create the rough opening.
If your home’s framing is 16" on-center, a
notch will need to be cut in the Grille in order
to accomodate the center joist running accross
the opening, as shown below. DO NOT CUT
THE CENTER JOIST ITSELF.
Page 4
installation: PowErED airlock assEmbly
Startbyplacingthebaseonaatsurface.
Find the square drive bit, it can be used with
a cordless drill to assist you in the next steps
(hand tools can also be used).
PARTS
Attachtherstofthefoursidestothebase
using 4 assembly screws.
Tamarack HV5800M
Whole House Fans Installation Manual, P/N HV5800M.1
©Tamarack Technologies, Inc., 2018. All Rights Reserved.