Operation Manual

4. Press the “PROG” button again to add the desired track to the program.
5. Repeat steps 2 and 3 to enter additional tracks into the program.
6. When all the desired tracks have been programmed, press the “PLAY/PAUSE/USB”
button to play the disc in the order you have programmed.
7. Press the “STOP” button twice to end program play.
GB-7
AUDI
O CD/MP3 CD OPERATION
Operating Audio CDs /MP3 CDs
1. Switch
the function selector to “CD/MP3/USB/SD”. The unit will turn on automatically.
2. Press the “Open” button to open the CD door (“OP” and the clock appear on the display)
• Place the disc on the disc tray, with the label facing up.
• Hold the disc without touching either of its surfaces, align it with the guides and
place
it in the right position.
3. Close the CD door unit until it clicks (The disc will play automatically).
• If you are playing a disc containing MP3 files, you may select the desired folder
using the “ALBUM” button, then press the “SKIP” button to choose the desired
track in the folder selected.
(File no. shown on the display is the file no. of existing folder, not the file no. of total
tracks.)
4. Stopping play
Press the “STOP” button once to stop play.
• If you then press the “PLAY/PAUSE/USB” button, play starts automatically from
the
first track.
Skip and Search
SKIP- / SKIP+ Button:
• Press these buttons to go to the previous / next track.
• Press the SKIP button once to return to the beginning of the current track.
+10 Track
1. Press the ”+10 Track” button to fast forward 10 songs. For exa
mple, if you are playing
track 1, press the “+10 Track” button to go to track 11.
2. The unit will go to last track if the disc contains less than 10 tracks after the current track.
Mode button
Before or during playback of an audio CD or a CD containing MP3 files, press the “MODE”
button to change playback mod
e in the following order:
1 - REPEAT 1
2 - REPEAT ALBUM ( *MP3 CDs ONLY )
3 - REPEAT ALL
4 - RANDOM
5 - NORMAL PLAYBACK
CD/MP3
Programmed play
Up to 20 tracks can be program
med.
Before programming, be sure to press the “STOP” button.
1. Set the function selector to
“CD/MP3/USB/SD” mode.
2. Press the “PROG” button and the display will show “P01”.
3. If the CD is an audio CD (no MP3 files),
select a desired track using the “SKIP+/-”
buttons.
• If the CD contains MP3 files, you may select the desired folder using the “ALBUM”
button , then press the “SKIP+/-” button to choose desired track of the folder
selected.
(The file no. shown on the display is the file no. of existing folder, not the file no. of total
tracks.)