Operation Manual

8. Press the “STOP” button twice to end program play.
GB-8
USB device/ MEMORY CARD OPERATION
Operating a USB device or memory card
1. Switch the function selector to “CD/MP3/USB/SD” mode. The unit will turn on
automatically.
2. Insert the USB Memory Device/Memory Card into the slot.
3. Press and hold down the “PLAY/PAUSE/USB” button for few seconds to enter USB
Memory Device/Memory Card mode.
4. The USB Memory Device/Memory Card will play automatically.
• You may select a desired folder by using the “ALBUM” button, then press the
“SKIP” button to select the desired track in the selected folder.
5. Stopping play
Press the “STOP” button once to stop play.
• If you then press the “PLAY/PAUSE/USB” button, play starts automatically from
fir
st track.
6. Press and hold down the “PLAY/PAUSE/USB” button for a few seconds to switch back
to CD/MP3 mode.
Skip and Search
SKIP-/+ buttons:
• Press these buttons to go to the previous / next track.
• Press the “SKIP-” button once to return to the beginning of the current track.
+10 Track
1. Press “+10 Track” button on the remote to step up 10 songs, e.g. if you are playing track
1, it will go to track 11 when the “+10 Track” button is pressed.
2. The unit will go to last track of the disc if there are less than 10 songs after the current
track
.
Mode button
Press the “MODE” button before or during playback of a USB Memory Device/Memory Card
to switch the playback mode in the following order
1 - REPEAT 1
2 - REPEAT ALBUM ( *only if the media contains MP3 files/folders )
3 - REPEAT ALL
4 - RANDOM
5 - NORMAL PLAYBACK
USB Programmed play
Up to 20 tracks can be programmed. Before programming, be sure to press the “STOP” button.
1. Set the function selector to “CD/MP3/USB/SD” mode.
2. Press and hold down the “PLAY/PAUSE/USB” button for few seconds to entry USB
Memory Device/Memory Card mode.
3. Press the “PROG” button and the display will show “P01”.
4. If you are playing an MP3 disc, you may select the desired folder using the “ALBUM”
button, then press the “SKIP” button to choose the desired track in the folder selected .
5. Press the “PROG” button again to add the desired track to the program.
6. Repeat steps 3 and 5 to enter additional tracks into the program.
7. When all the desired tracks have been programmed, press the “PLAY/PAUSE/USB”
button to play the disc in the order you have programmed.