User's Manual

BASIC OPERATION
3
21
1. Turn power ON
Push [POWER] for 1 sec. to turn
power ON.
2. Select VFO
Push [CLR] or [V/M] to select VFO
mode.
3. Adjust volume
Rotate [VOL] to obtain the desired
level of audio output.
4. Adjust squelch
Rotate [SQL] fully counterclockwise,
then clockwise until the audio noise
just disappears.
5. Select the receive
mode
Airband communications are in AM
mode. If the receiver is not already in
AM mode:
Push the [MODE] switch one or more
times until AM appears in the function
display.
■ Listening example 2 — airband broadcast in AM mode
6. Select the tuning step
Tuning steps for the airband are usu-
ally 25 kHz*. To set the 25 kHz tun-
ing step:
While pushing [FUNC], push
[
(MODE)TS], then rotate [DIAL] until
“25 kHz” appears in the function dis-
play.
*Check listings for your area.
VFO
AM
144.0000
MODE
Appears
VFO
AM
SET TS
TS 25 .00kHz
[DIAL]