Manual
Table Of Contents
- 1. Getting started
- 2. Your B-6
- 3. Conception of the digital layout
- 4. Connections
- 5. Settings / Configuration
- 6. Operation
- 7. Update
- 8. Checklist for troubleshooting and error correction
- 9. Technical data
- 10. Warranty, EU conformity & WEEE
tams elektronik
tams elektronik Booster B-6
9. Technical data
9.1. Booster B-6
Digital protocols
Data formats Motorola-I and -II
DCC (according to NMRA and RCN standard)
m3 and mfx (limited to the control of mfx decoders)
Formats for the automatic
registration of vehicle
decoders
DCC-A
This function is not yet available (Status: 04/2023).
Feedback format RailCom (RailCom cutout can be switched off)
integrated global RailCom detector
Interfaces
For the connection the digital
central unit or further
boosters
BiDiB (RJ45) or
DCC-compliant ("CDE"
For the connection of of a
BiDiB PC interface
BiDiB (RJ45)
Track output Main track
Electrical properties
Power supply 24 volts direct current
Note: Only the power supply unit included in the scope of delivery is permitted
as power supply for the mc² including integrated booster!
Maximum output current 2.0 to 6.0 A
adjustable in 1 A steps
Current consumption
(without consumer)
max. 100 mA
Output voltage 8 to 22 volts digital voltage (regulated)
adjustable in 1 V steps
Output signal symmetrical
Power consumption max. 132 watts
Protection
Technical data | 39