Instructions
Table Of Contents
- Part A: General information
- Part B: LC-NG versions
- 1. LC-NG-01 "City Lighting"
- 2. LC-NG-02 "Residential buildings"
- 3. LC-NG-03 "Office and commercial buildings"
- 4. LC-NG-04 "Street lamps"
- 5. LC-NG-05 "Road traffic"
- 6. LC-NG-06 "Emergency vehicles"
- 7. LC-NG-07 "(Road) construction site"
- 8. LC-NG-08 "Fire station"
- 9. LC-NG-09 "Railway station"
- 10. LC-NG-10 "Workshop"
- 11. LC-NG-11 "Flickering flames & candle lights"
- 12. LC-NG-12 "Event"
- 13. LC-NG-13 "Chaser lights"
- 14. LC-NG-14 "Funfair lighting"
tams elektronik
LC-Modules Next Generation English
Parts list
Component Value Number
Electrolytic capacitor 100 µF/25 V 1
Trim pot 500 K 1
Screw terminals 2-pole, grid spacing 3.5 mm 2
7-pole*, grid spacing 3.5 mm
* consisting of two 2-pole and
one 3-pole modular terminal
2
Assembly
The Light Computer LC-NG is assembled on the side that is not
equipped with SMD components. The components are soldered on the
side that is equipped with SMD components.
Assembly side Solder side
Proceed according to the order in the list below. First solder the
components from the solder side and cut off the protruding wire ends
with a page cutter just above the soldering point. Follow the soldering
instructions in section 3.
Page 17