Instructions
Table Of Contents
- Part A: General information
- Part B: LC-NG versions
- 1. LC-NG-01 "City Lighting"
- 2. LC-NG-02 "Residential buildings"
- 3. LC-NG-03 "Office and commercial buildings"
- 4. LC-NG-04 "Street lamps"
- 5. LC-NG-05 "Road traffic"
- 6. LC-NG-06 "Emergency vehicles"
- 7. LC-NG-07 "(Road) construction site"
- 8. LC-NG-08 "Fire station"
- 9. LC-NG-09 "Railway station"
- 10. LC-NG-10 "Workshop"
- 11. LC-NG-11 "Flickering flames & candle lights"
- 12. LC-NG-12 "Event"
- 13. LC-NG-13 "Chaser lights"
- 14. LC-NG-14 "Funfair lighting"
tams elektronik
LC-Modules Next Generation English
Part B: LC-NG versions
1. LC-NG-01 "City Lighting"
1.1. Mode of operation
After the module is switched on, i.e. as soon as the switching input is
connected to earth, the 14 outputs are switched on successively. The
length of the pauses between the switching on of the module and the
successive switching on of the outputs varies randomly. The maximum
pause length can be set at the trim potentiometer. When switching off,
the sequence is changed and the length of the pauses is shortened.
The module can be cascaded as desired. This makes it possible to
connect further LC-NG modules to one or more outputs that are to be
switched with a time delay. The number of LC-NG-01 modules that can
be connected in series is not limited. Therefore, the lighting for
complete model railway layouts can be switched on and off with a time
delay using one switch.
Use of the switching input
Switching input Effect
Switch closed
(switched to earth)
The outputs are switched on one after the
other. The pause length varies randomly.
Switch open
The outputs are switched off one after the
other. The pause length varies randomly.
Page 45