Instructions
Table Of Contents
- Part A: General information
- Part B: LC-NG versions
- 1. LC-NG-01 "City Lighting"
- 2. LC-NG-02 "Residential buildings"
- 3. LC-NG-03 "Office and commercial buildings"
- 4. LC-NG-04 "Street lamps"
- 5. LC-NG-05 "Road traffic"
- 6. LC-NG-06 "Emergency vehicles"
- 7. LC-NG-07 "(Road) construction site"
- 8. LC-NG-08 "Fire station"
- 9. LC-NG-09 "Railway station"
- 10. LC-NG-10 "Workshop"
- 11. LC-NG-11 "Flickering flames & candle lights"
- 12. LC-NG-12 "Event"
- 13. LC-NG-13 "Chaser lights"
- 14. LC-NG-14 "Funfair lighting"
tams elektronik
English LC-Modules Next Generation
10. LC-NG-10 "Workshop"
10.1. Mode of operation
Various lighting effects in a workshop are simulated at the outputs of
the LC-NG-10: welding light, open fire (fire flicker), hazard warning
lights and fluorescent lamps. The outputs for the fluorescent lamps are
switched on and off by a switch. Two outputs are switched on and off
without effects and can be used, for example, to connect small lamps
or LEDs for lighting offices or recreation rooms.
In addition, a servo can be connected for controlling a gate or crane. A
warning flasher is switched in parallel with the transmission of the servo
signal.
Use of the switching input
Switching input Effect
closed (switched to earth) Fluorescent lamps (outputs 8 -11)
on
open Fluorescent lamps (outputs 8 -11)
off
Settings at the trim potentiometer: ---
Page 78