Instructions
Table Of Contents
- Part A: General information
- Part B: LC-NG versions
- 1. LC-NG-01 "City Lighting"
- 2. LC-NG-02 "Residential buildings"
- 3. LC-NG-03 "Office and commercial buildings"
- 4. LC-NG-04 "Street lamps"
- 5. LC-NG-05 "Road traffic"
- 6. LC-NG-06 "Emergency vehicles"
- 7. LC-NG-07 "(Road) construction site"
- 8. LC-NG-08 "Fire station"
- 9. LC-NG-09 "Railway station"
- 10. LC-NG-10 "Workshop"
- 11. LC-NG-11 "Flickering flames & candle lights"
- 12. LC-NG-12 "Event"
- 13. LC-NG-13 "Chaser lights"
- 14. LC-NG-14 "Funfair lighting"
tams elektronik
LC-Modules Next Generation English
10.2. Pin assignment LC-NG-10
Connection of light
bulbs
(→ page 24)
Connection of LEDs
(→ page 25)
Connection of a
servo
(→ page 32)
1 Fire flicker 1*
1
14 Hazard warning light
2 Welder 1*
2
13 Welder 4*
2
3 Welder 2*
2
12 Welder 3*
2
4 Brandflackern 2 *
1
11 Fluorescent lamp 4*
3
5
Servo crane/gate
10 Fluorescent lamp 3*
3
6 Room 1 9 Fluorescent lamp 2*
3
7 Room 2 8 Fluorescent lamp 1*
3
Required accessories
Light bulbs or LEDs with suitable series resistors
one servo, one servo board and one resistor 470 (→ page 32)
*1
Tip: The effect is particularly realistic if both outputes are connected together to a fireplace
and one output is with a yellow and one with an orange LED or lamp.
*2
Tip: The effect is particularly realistic when very bright cool white or blue LEDs are
connected.
*3
Tip: The effect is particularly realistic when white LEDs are connected.
Page 79