Product Manual

This Service Manual is arranged for quick, easy reference Whenreplacement parts are required, use only approved
and is divided into numbered sections. parts. Failure to do so mayresult in products malfunction
a
nd possible injury to operator and/or bystander.
NOTE
:
Read all information for servicing a part or system
before repair work is started to avoid needless
NOTE:All referenceto "Left","Right","Front" and "Back"
assembly.
are given from operators position.
NO
TE: The descriptions and specifications contained in
this manual were in effect at the time this manual
was approved for printing. We reserve the right to
Proper preparation is very important for efficient service
discontinue models without notice and without
work. A clean work area at the start of each job will allow
incurring ob!igation. The equipment identified as
you to perform the repair as easily and quickly as possible,
either standard or optional and the various illustra-
and reduce incidence of misplace tools and parts. A unit
tions may not all be applicab!e to your unit. If you
that is excessively dirty should be cleaned before work have question, always check with your dealer.
starts. Cleaning will occasionally uncover trouble sources.
Tools, instruments and parts needed for the job should be
gathered before work is started.
Interrupting a job to locate tools or parts is a needless
delay. Special tools required for a job are listed in this
manual.
WWW.TANAKAPOWEREQUIPMENT.COM [e-mail]
Introduction
How To Use Your Service Manual
Replacement Parts
Preparation For Service