Datasheet

ManualsBrandsTANCAP ManualsCapacitorsCeramic capacitor THT 150 pF 100 V 5 %

TANCAPTECHNOLOGYCO.,LTD.

ProductName CC4(CT4)RadialleadedtypeMultilayerCeramicCapacitors

1.Scope：

This specification applies to CC4 (CT4) Radial leaded type Multilayer Ceramic Capacitors

producedbyourcompanyforuseinelectronicequipmentof(nameofcustomer)

  2.Standard：

《 Detail specification for electronic components fixed ceramic dielectric capacitors CC4

AssessmentlevelE》 SJ/T10569‐94

《 Detail specification for electronic components fixed ceramic dielectric capacitors CT4

AssessmentlevelE》 SJ/T10569‐94

3.Classify：

CC4：Materialofdielectricis:NPO（N）。

CT4：Materialofdielectricis:X7R（B）、Z5U、Y5V（Y）。

4.TestConditions：

4.1：StandardCondition：Iftherearenospecificprescribe，Thetestwi llbedoneaccordingto

standardcondition(Temperature15‐35℃;RelativeHumidity 45‐75%), ButIf there are any

problems subject to standard condition or there are some specific requirements. Please

testaccordingto4.2

4.2：FundamentalCondition：Temperatureis20℃;RelativeHumidityis60‐70%;Atmospheric

pressureis800‐1060mbar。

5.TestingMethod：

Whentheproductswillbetested,Inordertoavoidtheerrorofresult,Thecapacitorsmustbe

placedinthetemperaturethatthecapacitorsbetestedfor30minutesanddischargedfully.







Summary of content (6 pages)

PAGE 1
Product Name CC4(CT4)Radial leaded type Multilayer Ceramic Capacitors 1.Scope： This specification applies to CC4 (CT4) Radial leaded type Multilayer Ceramic Capacitors produced by our company for use in electronic equipment of (name of customer) 2.Standard：《 Detail specification for electronic components fixed ceramic dielectric capacitors CC4 Assessment level E》 SJ/T10569‐94 《 Detail specification for electronic components fixed ceramic dielectric capacitors CT4 Assessment level E》 SJ/T10569‐94 3.
PAGE 2
Product Name CC4(CT4)Radial leaded type Multilayer Ceramic Capacitors 5.Testing Items： Item Performance Characteristics Testing Method Measured by Dimensions gauge Dimensions See page 3 Appearance Correct Marking、clear, No pinhole、No burr、No damage Insulation Resistance CC4 CR≤10nF R≥10000MΩ CR＞10nF CR ×R≥100s CT4 CR≤25nF CR＞25nF B B=±0.1pF C=±0.25pF D=±0.
PAGE 3
Product Name CC4 (CT4) Radial leaded type Multilayer Ceramic Capacitors L W+6 T 103 D H F A式 L L L W 105 W+2 104 H 2 W 224 F H H F F B1 B2 type type C Unit：（mm） Dimensions Appearance 0805 1206 1210 1812 2225 3035 F Hmin Lmax Wmax A B1 C1 5.0 5.0 2.5 B2 C2 5.0 4.0 C3 C2 5.0 4.0 C3 C4 C4 5.0 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 4.2 5.0 7.6 8.5 10.5 12.5 Tmax 3.8 3.8 4.5 3.8 5.5 3.8 8.5 3.8 9.5 4.2 10.5 4.2 4 TANCAP TECHNOLOGY CO., LTD. D 0.
PAGE 4
Packaging Style Ammo Package ΔP P P2 Δh W1 H1 W0 H 240max H2 W S P1 T D 340max 51(+1,-2) P0 Code P P0 W W0 H2 W2 H1 D T ΔH H S P1 P2 ΔP Dim 12.7 12.7 18 5 9 0 32.5 4 0.5 0 16‐18 5 3.85 6.35 1.3 Tol ±1 ±0.3 +1 ‐0.51 min ±0.5 ±1 max ±0.2 ±2.0 ±0.2 ±0.5 ±0.5 ±0.7 ±0.4 max F A D C 376mm 376mm B E Reel Package A B 355‐365 5.08max Packaging Quantity Reel Package 2500 C D E F 38.10‐46.02 102.01max 86.36max 25.40‐30.
PAGE 5
Application Notes for Multilayer Capacitors 1. Effect of Temperature Both capacitance and dissipation are affected by variations in temperature. The maximum capacitance change with temperature is defined by the temperature characteristic. However, this only defines a “box” bounded by the upper and lower operating temperatures and the minimum and maximum capacitance values. Within this “box”, the variation with temperature depended upon the specific dielectric formulation.
PAGE 6
Because the capacitance changes rapidly immediately after de‐aging, capacitance measurements are usually delayed for at least 10 hours after the de‐aging process, which is often referred to as “last heat”. In addition, manufacturers utilize the aging rates to set factory test limits which will bring the capacitance within the specified tolerance at some future time, to allow for customer receipt and use.