- Tandberg Data
Table Of Contents
- Contents
- Introduction
- Menu structure
- TANDBERG 7000 Videoconferencing System
- At a glance - the TANDBERG 7000 system
- Installation
- Precautions
- Unpacking
- Installing
- System configuration
- Getting started
- System start-up
- Welcome menu
- Basics
- Making and ending calls
- Directory
- Microphone on/off
- General use
- Adjusting volume
- View outgoing video (selfview)
- Do Not Disturb / Sleep Mode
- Controlling the Main Camera
- Selecting video sources
- Voice Activated Camera Positioning
- Presets
- Far end camera control (FECC)
- Sending/receiving still images
- Duo Video
- MultiSite (MCU)
- PC SoftPresenter
- PC Presenter
- Web-interface
- Advanced use
- Main menu
- Call quality
- Presentations
- Utilities
- MCU services
- Audio Settings
- Video Settings
- Terminal Settings
- Network Configuration
- LAN Settings
- Call Settings
- Dataport configuration
- Language
- Software Options
- Diagnostics
- Peripheral Equipment
- Interfaces
- Dual Monitor
- Document camera
- Multiple controllable cameras
- AudioScience microphone
- Tracker
- Video Cassette Recorder (VCR)
- Telephone Add-On
- Extra fixed cameras
- PC applications
- PC SoftPresenter
- Additional microphones
- Appendices
- Index
26
TANDBERG Videoconferencing SystemGetting started
Selecting / setting default network
To select a specific network, press ‘Net’ when you are in the dial menu.:
• Highlight the network to be used in your call.
• Press ‘Select’ to select network or press ‘Set as Default’ to set the selected network as your preferred choice
for this and all subsequent calls.
If ‘Auto’ is selected, the system will select a network based upon the following criteria:
• If an IP-address (e.g. 123*3*0*12 ) is entered, ‘LAN’ (H.323) is selected.
• If the first digits in the number match those set in ‘H.323 Prefix’ under ‘H.323 Settings’, ‘LAN’ is selected.
• In other cases, ‘ISDN’ (H.320) is selected*.
If you want to assign a specific prefix to the network selection or if you want to define your own network
configuration, see ‘Network Profiles’ in ‘Call Settings’, ‘Terminal Settings’.
* - ISDN indicates both ISDN-BRI, ISDN-PRI, Leased E1/T1 and External Networks.