User guide
Table Of Contents
- 1 About This Guide
- 2 Product Overview
- 3 Unpacking the StorageLibrary
- 4 Hardware Installation
- 5 Operator Interfaces
- 6 Configuring the Library
- About the Setup Wizard
- Applying a License Key
- Configuring Pass-Thru
- Configuring I/E Slots
- Configuring Cleaning Slots
- Configuring Auto Clean
- Configuring Partitions
- Configuring Menu Timeout
- Setting Date and Time
- Configuring Barcode Scan
- Configuring Audible Alarm
- Configuring Network Settings
- Configuring FPI Password
- Configuring RMI Password
- Configuring SNMP
- Configuring Notifications
- 7 Running the Library
- 8 Getting Status and Information
- 9 Adding, Removing and Replacing
- 10 Updating Firmware
- 11 Working With Cartridges and Barcodes
- 12 Troubleshooting
- 13 Shipping or Transporting the StorageLibrary
- 14 Specifications
- 15 Safety and Regulatory Information
- 16 Approved Drive Types
104 Specifications
Library Dimensions
Table 19. Library Dimensions
T40+ Dimensions
Width 445.0 mm +/- 0.5 mm (17.52” +/- 0.02”)
Height 176.4 mm max (6.945”)
Rear depth 770.6 mm max (30.34”)
Front depth 31.0 mm max (1.22”)
The rear depth is measured from the rear surface of rack mount bracket to the rearmost feature of the
library.
The front depth is measured from the rear surface of the rack mount bracket to the front most feature
of the library.
Library Component Weights
Table 20. Library Component Weights
Components Weight
Drive CRU FH 3600g / 7.93 lbs
Drive CRU HH 1960g / 4.32 lbs
Power CRU 875g / 1.93 lbs
Magazine without cartridges 8 slots 1600g / 3.53 lbs
Magazine without cartridges 12 slots 1890g / 4.17 lbs
Library with 1 FH drive CRU 35kg / 77.2 lbs
Library with 2 FH drive CRUs 38kg / 83.77 lbs
Library without drive CRUs, magazines 24.5kg / 54 lbs
Library without drive CRUs, magazines, power CRU 23.55kg / 51.9 lbs