User guide
Table Of Contents
- 1 About This Guide
- 2 Product Overview
- 3 Unpacking the StorageLibrary
- 4 Hardware Installation
- 5 Operator Interfaces
- 6 Configuring the Library
- About the Setup Wizard
- Applying a License Key
- Configuring Pass-Thru
- Configuring I/E Slots
- Configuring Cleaning Slots
- Configuring Auto Clean
- Configuring Partitions
- Configuring Menu Timeout
- Setting Date and Time
- Configuring Barcode Scan
- Configuring Audible Alarm
- Configuring Network Settings
- Configuring FPI Password
- Configuring RMI Password
- Configuring SNMP
- Configuring Notifications
- 7 Running the Library
- 8 Getting Status and Information
- 9 Adding, Removing and Replacing
- 10 Updating Firmware
- 11 Working With Cartridges and Barcodes
- 12 Troubleshooting
- 13 Shipping or Transporting the StorageLibrary
- 14 Specifications
- 15 Safety and Regulatory Information
- 16 Approved Drive Types
StorageLibrary T40+ Series Installation and User Guide 105
Power Requirements
Table 21. Library Power Requirements
Power Requirements Values
Input Voltage 100 – 240 VAC
Input Frequency 50 –- 60 Hz
Inrush Current (Cold Start) Less than 15 A, 115 VAC
Less than 30 A, 230 VAC
Power Consumption Average 70 W
Power Consumption Peak* 120 W*
* Maximum peak length, less than 10ms.
Climatic Specifications
Table 22. Temperature Range
Temperature
Operating Range
+10°C to +35°C
Gradient
10°C/hour
Non-Operating Range
-30°C to +60°C
Gradient
20°C/hour
Table 23. Humidity Range
Humidity
Operating Range 20%Rh to 80%Rh
Gradient 10%Rh/hour
Non-Operating Range 10%Rh to 90%Rh
Gradient 20%Rh /hour
Table 24. Altitude Range
Altitude
Operating Range -500 to 10000 ft
Non-Operating Range -500 to 40000 ft