User guide
Table Of Contents
- 1 About This Guide
- 2 Product Overview
- 3 Unpacking the StorageLibrary
- 4 Hardware Installation
- 5 Operator Interfaces
- 6 Configuring the Library
- About the Setup Wizard
- Applying a License Key
- Configuring Pass-Thru
- Configuring I/E Slots
- Configuring Cleaning Slots
- Configuring Auto Clean
- Configuring Partitions
- Configuring Menu Timeout
- Setting Date and Time
- Configuring Barcode Scan
- Configuring Audible Alarm
- Configuring Network Settings
- Configuring FPI Password
- Configuring RMI Password
- Configuring SNMP
- Configuring Notifications
- 7 Running the Library
- 8 Getting Status and Information
- 9 Adding, Removing and Replacing
- 10 Updating Firmware
- 11 Working With Cartridges and Barcodes
- 12 Troubleshooting
- 13 Shipping or Transporting the StorageLibrary
- 14 Specifications
- 15 Safety and Regulatory Information
- 16 Approved Drive Types
StorageLibrary T40+ Series Installation and User Guide 107
15
15 Safety and Regulatory Information
Safety Approvals
This product complies with the following safety standards:
Europe
EN60950-1 / A11: 2004
USA
UL60950-1: 2006, First Edition
Canada
CSA C22.2 No. 60950-1-03 1
st
Edition, 2006
CB report
IEC 60950-1: 2001
EMC Approvals
This product complies with the following EMC standards:
Europe
EN55022: 1998 +A1: 2000 +A2:2003, Class A
Warning: This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
EN61000-3-2: 2000
EN61000-3-3: 1995 +A1:2001
EN55024:1998 +A1: 2001 +A2:2003
EN61000-6-2: 2001