User guide
Table Of Contents
- 1 About This Guide
- 2 Product Overview
- 3 Unpacking the StorageLibrary
- 4 Hardware Installation
- 5 Operator Interfaces
- 6 Configuring the Library
- About the Setup Wizard
- Applying a License Key
- Configuring Pass-Thru
- Configuring I/E Slots
- Configuring Cleaning Slots
- Configuring Auto Clean
- Configuring Partitions
- Configuring Menu Timeout
- Setting Date and Time
- Configuring Barcode Scan
- Configuring Audible Alarm
- Configuring Network Settings
- Configuring FPI Password
- Configuring RMI Password
- Configuring SNMP
- Configuring Notifications
- 7 Running the Library
- 8 Getting Status and Information
- 9 Adding, Removing and Replacing
- 10 Updating Firmware
- 11 Working With Cartridges and Barcodes
- 12 Troubleshooting
- 13 Shipping or Transporting the StorageLibrary
- 14 Specifications
- 15 Safety and Regulatory Information
- 16 Approved Drive Types
16 Product Overview
• A shielded male HD68 SCSI terminator
• SAS port cable
• FC port cable
Ethernet Port
This port is for networking in support of the Web Client. It is also used to communicate between units
that share cartridges in a Pass-Thru system. It allows you to connect the StorageLibrary to a 10
BaseT compatible Ethernet network.
Battery Holder
The battery for the Real Time Clock (RTC) is located behind a plate at the back of the library. See
Figure 2. A drive power extension cable can be found in the same location.
Back Panel Cover plate
If a drive bay is empty, a cover plate covers the opening to prevent dust from entering the library.
Redundant Power Supply
A redundant power supply is installed in the power supply slot marked 2. See Adding, Removing and
Replacing for more information.
Figure 2. Rear Panel of the StorageLibrary with 1 full-height SCSI Drive Installed
Power S
upply with
Fans in Slot 1
Redundant Power
Supply in Slot 2.
Back Panel
Cover Plates
Cooling
Fans
Ethernet
Port
Emergency
Release
Tool.
Real Time Clock-
battery and drive
power extension
cable behind
cover
SCSI
Connectors
Tape Drive
with Fan
Mains Power Switch,
Fuse and AC-inlet for
Power Supply in Slot 1