User guide
Table Of Contents
- 1 About This Guide
- 2 Product Overview
- 3 Unpacking the StorageLibrary
- 4 Hardware Installation
- 5 Operator Interfaces
- 6 Configuring the Library
- About the Setup Wizard
- Applying a License Key
- Configuring Pass-Thru
- Configuring I/E Slots
- Configuring Cleaning Slots
- Configuring Auto Clean
- Configuring Partitions
- Configuring Menu Timeout
- Setting Date and Time
- Configuring Barcode Scan
- Configuring Audible Alarm
- Configuring Network Settings
- Configuring FPI Password
- Configuring RMI Password
- Configuring SNMP
- Configuring Notifications
- 7 Running the Library
- 8 Getting Status and Information
- 9 Adding, Removing and Replacing
- 10 Updating Firmware
- 11 Working With Cartridges and Barcodes
- 12 Troubleshooting
- 13 Shipping or Transporting the StorageLibrary
- 14 Specifications
- 15 Safety and Regulatory Information
- 16 Approved Drive Types
20 Unpacking the StorageLibrary
To unpack the StorageLibrary, follow the instructions below.
Carefully unpack the unit from the shipping container. Save the container and packing materials in
case you need to transport the StorageLibrary in the future. The packaging is specifically designed for
the library to ensure it is not damaged during transportation.
The StorageLibrary could be lifted by one person if drives, power supply, and magazines are
removed. However, for absolute safety, it is recommended that two people lift the StorageLibrary. Full
library weight = 38 kg / 84 lbs (2 FH drives). Empty library weight = 23.6 kg / 52 lbs (does not include
drives, magazines or power supply).
Review the contents of the shipping container to be sure that all parts were included in the shipment
and no parts are damaged. A standard package for the StorageLibrary consists of the following items:
A factory-assembled StorageLibrary unit containing four cartridge magazines
A standard accessory kit containing:
Printed copy of the Quick Start Guide
Printed copy of the T40 Mounting installation Guide.
1 Warranty/Registration Information
Rack mounting kit including rack mount ears
2 power cords: one for USA/Japan and one for European power outlets
1 Ethernet cable
Media barcode label kit (contains media labels and cleaning cartridge labels)
There will be variations of this list. Depending on the number of drives in your library and whether
or not your library is equipped with SCSI, SAS or Fibre Channel drives. The accessory kit for
SCSI drives contains a terminator and SCSI cable.
The StorageLibrary accessory kit contains no cartridges.
Complete product registration online at http://www.tandbergdata.com, Support, Register Your
Product.