User guide
Table Of Contents
- 1 About This Guide
- 2 Product Overview
- 3 Unpacking the StorageLibrary
- 4 Hardware Installation
- 5 Operator Interfaces
- 6 Configuring the Library
- About the Setup Wizard
- Applying a License Key
- Configuring Pass-Thru
- Configuring I/E Slots
- Configuring Cleaning Slots
- Configuring Auto Clean
- Configuring Partitions
- Configuring Menu Timeout
- Setting Date and Time
- Configuring Barcode Scan
- Configuring Audible Alarm
- Configuring Network Settings
- Configuring FPI Password
- Configuring RMI Password
- Configuring SNMP
- Configuring Notifications
- 7 Running the Library
- 8 Getting Status and Information
- 9 Adding, Removing and Replacing
- 10 Updating Firmware
- 11 Working With Cartridges and Barcodes
- 12 Troubleshooting
- 13 Shipping or Transporting the StorageLibrary
- 14 Specifications
- 15 Safety and Regulatory Information
- 16 Approved Drive Types
StorageLibrary T40+ Series Installation and User Guide 45
Home Screen
The RMI Home Screen is shown in Figure 30. To navigate in the RMI menu, use the pull down
menus. Click on the graphics to display status information and details about the library components.
Figure 30. Remote Management Interface Home Screen
Operator Privileges
Controlling access to screens and operations within the library preserves the integrity of the library
and the data that is stored within it. There are two user privilege levels within the library: Administrator
and Operator.
1. Administrator is allowed access to the entire physical library and all of its partitions.
2. Operator has access to all partitions and can perform functions within partitions, such as
performing cartridge and tape drive operations. An operator cannot perform operations that affect
the physical library, such as creating or deleting partitions.
Details on user privileges include:
• One administrative login is available on the library. The user name is Administrator.
• One operator login is available on the library. The user name is “Operator”.