User guide
Table Of Contents
- 1 About This Guide
- 2 Product Overview
- 3 Unpacking the StorageLibrary
- 4 Hardware Installation
- 5 Operator Interfaces
- 6 Configuring the Library
- About the Setup Wizard
- Applying a License Key
- Configuring Pass-Thru
- Configuring I/E Slots
- Configuring Cleaning Slots
- Configuring Auto Clean
- Configuring Partitions
- Configuring Menu Timeout
- Setting Date and Time
- Configuring Barcode Scan
- Configuring Audible Alarm
- Configuring Network Settings
- Configuring FPI Password
- Configuring RMI Password
- Configuring SNMP
- Configuring Notifications
- 7 Running the Library
- 8 Getting Status and Information
- 9 Adding, Removing and Replacing
- 10 Updating Firmware
- 11 Working With Cartridges and Barcodes
- 12 Troubleshooting
- 13 Shipping or Transporting the StorageLibrary
- 14 Specifications
- 15 Safety and Regulatory Information
- 16 Approved Drive Types
StorageLibrary T40+ Series Installation and User Guide 47
Table 3. Cartridge Present Symbols on FPI during Inventory and in the Maps Menu
Symbol on
FPI
Description
__
Drive Present, load status empty
??
Drive present, load status unknown
Drive Status
**
Drive not installed
Grey box if magazine slot/robotics status is unknown
Black box if cartridge is present in the magazine slot/the robotics
White box if cleaning cartridge is present in the magazine slot
Magazine slot
and
Robotics status
N
The magazine slot/the robotics is empty
A Maps Menu on the FPI is shown in Figure 31. The figure also indicate where the Robotics Status
Symbol is located on the display. An example of the library taking inventory is also shown.
• The robotics status is unknown (grey).
• Slot 30 is occupied.
• Slot 36 has a cleaning cartridge.
• Slots 29, 31 to 35, and 37 to 40, are empty.
• The status of the rest of the slots are unknown.
• One drive is installed in the lowest position, and the load status is still unknown.
Figure 31. Maps Menu on the FPI.
Robotics Status