User guide

StorageLibrary T40+ Series Installation and User Guide 63
7
7 Running the Library
This chapter explains how to access and operate your library. Most of the library functions described
here can be found under the Operations menu.
Logging In
To access the remote management interface, the Operator and Administrator must first log in to the
library, in order to perform library functions or view library operations.
If you are logging in to the library for the first time using the default Administrator account
(Administrator), leave the password field blank. As soon as you have logged on, it is recommended
that you change the default Administrator password.
The password protection on the front panel interface is disabled when you power ON the library for
the first time. This means that anyone has full access to the library, and can do anything without being
asked for a password. As long as there is no FPI password enabled, regardless of how many times
the system is re-started, the library will have this “free access”.
Once the FPI password is enabled, the user will need to enter an Operator password or an
Administrator password. Access to the library is now limited at two levels. When a user tries to access
the library now, an “Enter Password” prompt appears on the screen.
Logging Out
Log out functionality is available on both the front panel and the remote management interface. Log
out when you have finished accessing the library. Logging out secures the library from being
accessed by unauthorized users.
From the remote management interface, select the LOGOUT button at the top of the screen to log
out, or select X in the top right corner of the screen to close the browser window and log both the
Operator and Administrator out.
From the front panel interface, select Logout from the Operations menu to log out from the library.
Importing Cartridges
StorageLibrary provides two methods for importing cartridges: via the I/E slot or via bulk loading of
magazines.