User guide

StorageLibrary T40+ Series Installation and User Guide 69
Removing Cartridges from the Magazine
Gently press the cartridge release tab towards the cartridge until the cartridge is released. See Figure
34. The cartridge is spring loaded, so it is important to prevent the cartridge from popping all the way
out.
Warning
Prevent the cartridge from falling down, in order to avoid possible damage or loss
off data.
Figure 34. Ejecting a Cartridge from the Magazine Slot.
Gently press the cartridge release tab
towards the cartridge until the cartridge is
released.
Inserting a Magazine into the Unit
The right and left magazines are mirrored and can only be inserted into the correct left or right
magazine bay.
1. Insert the back of the magazine into the correct magazine bay. Make sure it is horizontally level
with the library.
2. Slide the magazine in carefully until the eject spring engages. See Figure 35.
3. Gently push the magazine further in against the spring until the magazine is latched.
Figure 35. Inserting a Magazine into the Unit