Product manual

156
PRODUCT MANUAL 433686
CHAPTER 6—VIEWING LIBRARY INFORMATION
Fibre Channel Tape Drive
5.
5.5.
5. Press OK.
Note: See “Changing the SCSI IDs” on page 52 for instructions on how to
change the tape drive SCSI IDs.
6.
6.6.
6. Press Back (as needed) to return to the Home screen.
TAPE DRIVE CONFIGURATION (TYPE)
To check a tape drive’s serial number:
1.
1.1.
1. At the Home screen, press Drive.
If necessary, enter the operator panel password (see page 80).
2.
2.2.
2. Press until the selection arrow ( ) points to Drive Configuration.
FibreChannel
Drive nn
N Port Address: nnnnnn
Loop–ID: nl
Port: nnnnnnnnnnnnnnnn
WWNN: nnnnnnnnnnnnnnnn
OK
Drive
Drive ID
Interface
Drive Configuration
Library SCSI Bridge
Select Back