Quick Installation Steps For more information and complete step-by-step instructions, see Tandberg StorageLibraryTM T40 Installation and User Guide. Caution Caution The Tandberg StorageLibraryTM T40 could be lifted by one person if drives, power supply, and magazines are removed. However, for absolute safety, it is recommended that two people lift the Tandberg StorageLibraryTM T40. Full library weight = 38 kg / 84 lbs (2 FH drives). Empty library weight = 23.
If your library includes fibre channel tape drives connect the fibre cables to the tape drives: a. Attach one end of the fibre cable to the fibre port on each drive. Attach the other end of the cable to the host, switch or hub. 4 Connect your Ethernet cable to the Ethernet port on the rear of the library. The Ethernet connection allows use of the Web Client. 5 Connect a power cord to the power connector on the rear of the library. US and EU power cords are supplied with the library.
Table: Power Requirements Power Requirements Values Input Voltage 100 – 240 VAC Input Frequency 50 –- 60 Hz Inrush Current (Cold Start) Less than 15 A, 115 VAC Less than 30 A, 230 VAC Power Consumption Average 70 W Power Consumption Peak* 120 W* * Maximum peak length, less than 10ms.
International Headquarter Tandberg Data ASA, Kjelsåsveien 161 P.O. Box 134 Kjelsås, N-0411 Oslo, Norway Tel: +47 22 18 90 90, Fax: +47 22 18 95 50 www.tandberg.com Worldwide subsidiaries Tandberg Data Corp., 12860 Danielson Court, Poway, U.S.A. Tel: 858-726-1800. Fax: 858-726-1801 Tandberg Data GmbH, Feldstrasse 81, D-44141 Dortmund, Germany. Tel: +49 231 5436 0. Fax: +49 231 5436 111 Tandberg Data S.A.S., 16/18 Ave. Morane-Saulnier, F-78941 Vélizy Cedex, France. Tel: +33 1 39 26 01 01/00800-82632374.