user manual

3
3 If your library includes fibre channe l tape drives c onnect the fibre
cables to the tape drives :
a. Attach one end of the fibre cable to the fibre port on each
drive. Attach the other end of the cable to the host, switch or
hub .
4 Connect your Ethernet cable to the Ethernet port on the rear of
th e library. The Ethernet connection allows use of the Web
Client .
5 Con nect a power cord to the power connector on the rear of the
library. US and EU power cords are supplied with the library.
6 Power on the library by t urn ing on the rear power switch.
7 If the l ibrary is a tabletop version, the library detects that the
locking screws are present. Follow the instructions on the front
panel display to remove the magazines to get access to the
screws. Remove the screws and reinsert the magazines. The
library will no w continue its power - on sequence.
8 Power up the host syst em.
9 Verify that each host can communica te with the library’s tape
drives.
10 Configure your library using th e library’s operator panel.