User Manual camera 990, 880, 770

TANDBERG Videoconferencing SystemGeneral use

• Press ‘Add Site’ to bring up the MultiSite dial menu.

• Enter the number to call.

The Quality will, by default, be the same as used by the first call. To place a telephone call instead of a video call,

press ‘Quality’ and select ‘Teleph’ in the Quality menu.

To use another network operator, press ‘Net’ and select operator in the Net menu.

• Press CONNECT

connect

• Press CONNECT to bring up the following menu:

connect

Adding an extra site - dial out

First establish a normal point-to-point call. It is recommended to plan the bandwidth usage before making the first

call so that you do not run out of bandwidth.

EXAMPLE: IF THE SYSTEM HAS 512KBPS AVAILABLE AND YOU WANT TO CONNECT 3 SITES IN ADDITION TO THE HOST, 128KBPS SHOULD BE SELECTED

FOR THE FIRST CALL. THE SYSTEM WILL THEN AUTOMATICALLY USE 128KBPS WHEN CONNECTING THE OTHER SITES.

When the first site is connected, add a site to the conference using the following procedure:

IT IS POSSIBLE TO CONNECT SEVERAL TELEPHONES, E.G. 2 VIDEO SYSTEMS + 3 TELEPHONES (A TOTAL OF 5 SITES).

TIP

IF THE MULTISITE SYSTEM DOES NOT HAVE ENOUGH

BANDWIDTH

TO ADD ANOTHER SITE, THE SYSTEM

WILL

AUTOMATICALLY DOWNSPEED TO ALLOW AN

ADDITIONAL

SITE TO BE ADDED TO THE

CONFERENCE

. REQUIREMENT: FAR END MUST

SUPPORT

DOWNSPEED AND MUST HAVE ENOUGH

BANDWIDTH.

NOTE

CONNECT THE SYSTEM WITH THE LOWEST

BANDWIDTH

FIRST IN ORDER TO OPTIMIZE

CONNECTION TIME.

TIP