Network Router - Residential Gateway User Manual

D13841.08
10.2007
17
TANDBERG 3G GATEWAY
USER GUIDE
Table of
Contents
Trademarks &
Copyright
Patents &
Disclaimers
Safety/
Environmental
To Get You
Up and Going
Using the 3G
Gateway
Viewing the
System Status
Configuring
the 3G Gateway
Maintenance
& Upgrade
Services
Dial Plan
Examples
Contact
Information
Using the 3G
Gateway
TANDBERG 3G GATEWAY
USER GUIDE
To start the 3G Gateway, simply connect the
power cable, and set the power switch button
(both at the rear) to position I.
On the front panel of the system the power
indicator LED, marked
PWR, will turn GREEN.
Power switch
Accessing the 3G Gateway
Forgot the Password?
The pwrec account is active for one minute following a restart.
Beyond that time, the system will have to be restarted to
change the password.
3G Gateway Start-up

Reboot the 3G Gateway.

Connect to the 3G Gateway via the serial interface once it has
restarted.

Login with User Name pwrec.
No password is required.

You will be prompted for a new password.
Starting Up the 3G Gateway
You may access the 3G
Gateway by entering the IP-
address of the 3G Gateway
in a standard WEB-browser.
You will then be asked to
enter a password. You will
need to enter admin as
user name. The default
password for the 3G Gateway
is TANDBERG. Remember
that the password is case
sensitive. Note that you may
also use SSH and Telnet to
configure the 3G Gateway.
USER NAME is admin
PASSWORD. Default
password is TANDBERG (NB!
case sensitive)