- Tandberg LCD TV INSTRUCTION MANUAL E5714, E5740-xxx

Options and Upgrades
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 3-7
ST.TM.E10076.3
3.4.2 Assembly
Rear Panel
NOTE…
The AES/EBU reference signal is provided for backwards compatibility only. When using E57xx
Encoders use the reference signal provided by the Base Board.
Figure 3.1: Additional Audio and Linear PCM Option (M2/EOM2/AUDLIN)
The Additional Audio option module comprises Assembly S12293 and Card
S11976. See Table 3.1 for the slots that it can be installed in.
Audio In Connector
Connect the audio cable to the AUDIO IN
connector. The 15-way, D-type male connector
is used in different ways according to the audio
input and the encoding configuration selected.
The connector provides two stereo pairs. They may be independently
configured as either analogue or digital. The left channel is used to input
digital audio.
Analogue Composite Video
Serial Digital Interface
Audio Input
Additional Audio
Option
Pins 7, 15
Pins 1, 9
Pins 4, 12
AES/EBU Digital A
A
ES/EBU Di
g
ital B
Digital Audio Inputs
AES/EBU
reference
Encoder
Additional Audio
Option
Pins 3, 10
Pins 1, 9
Pins 6, 13
Pins 4, 12
Mono 1 / Stereo 1 Right
Mono 2 / Stereo 1 Left
Mono 3 / Stereo 2 Right
Mono 4 / Stereo 2 Left
Output Transport Stream
Output Transport Stream
Output Transport Stream
COMP VIDEO
SDI IN
AUDIO IN
ASI OUT 1
ASI OUT 2
ASI OUT 3