User manual

116467.05Page 6 of 6
A 㑻ໄᯢ( A Class product declaration)
ᴀѻકЎ A 㑻 ITEˈ೼݊Փ⫼䇈ᯢ,䫁⠠ㄝᰒ㨫ԡ㕂ЁᏆࣙ৿བϟݙ
ᆍⱘໄᯢ(We declare here that the subject product is A Class ITE
product, and the following statement is clearly marked in the user
manual and nameplate ˖
ໄ ᯢ
ℸЎ A 㑻ѻકˈ೼⫳⌏⦃๗Ёˈ䆹ѻકৃ㛑Ӯ䗴៤᮴㒓⬉ᑆᡄDŽ೼䖭
⾡ᚙމϟˈৃ㛑䳔㽕⫼᠋ᇍ݊ᑆᡄ䞛পߛᅲৃ㸠ⱘ᥾ᮑDŽ
WARNING:
This is a class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take
adequate measures.
ໄ
ᯢ᠔೼ԡ㕂 Position of the Declaration˖
݀ৌ Company Name˖
TANDBERG Telecom AS
ㅒᄫ/Ⲫゴ Signature/ Stamp˖
Disclaimer
The information in this document is furnished for informational purposes only, is subject to
change without prior notice, and should not be construed as a commitment by TANDBERG.
TANDBERG reserves the right to amend any of the information given in this document in
order to take account of new developments.
Every effort has been made to supply complete and accurate information, however, TAND-
BERG assumes no responsibility or liability for any errors or inaccuracies that may appear
in this document, nor for any infringements of patents or other rights of third parties result-
ing from its use. No license is granted under any patents or patent rights of TANDBERG.
For your protection please read these safety instructions completely before you con-
nect the equipment to the power source. Carefully observe all warnings, precautions and
instructions both on the apparatus and in these operating instructions.
Retain this manual for future reference.
Water and Moisture
Do not operate the apparatus under or near water – for •
example near a bathtub, kitchen sink, or laundry tub, in a wet
basement, near a swimming pool or in other areas with high
humidity.
Do not touch the product with wet hands.•
Cleaning
Unplug the apparatus from communication lines, mains •
power-outlet or any power source before cleaning or
polishing. Do not use liquid cleaners or aerosol cleaners. Use
a lint-free cloth lightly moistened with water for cleaning the
exterior of the apparatus.
Unplug the apparatus from communication lines before •
cleaning or polishing. Do not use liquid cleaners or aerosol
cleaners. Use a lint-free cloth lightly moistened with water for
cleaning the exterior of the apparatus.
Ventilation
Do not block any of the ventilation openings of the apparatus. •
Never cover the slots and openings with a cloth or other
material. Never install the apparatus near heat sources
such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
Do not place the product in direct sunlight or close to a •
surface directly heated by the sun.
Lightning
Never use this apparatus, or connect/disconnect communication
cables or power cables during lightning storms.
Dust
Do not operate the apparatus in areas with high concentration of
dust.
Vibration
Do not operate the apparatus in areas with vibration or place it
on an unstable surface.
Power Connection and Hazardous Voltage
The product may have hazardous voltage inside. Never •
attempt to open this product, or any peripherals connected to
the product, where this action requires a tool.
This product should always be powered from an earthed •
power outlet.
Never connect attached power supply cord to other products.•
In case any parts of the product has visual damage never •
attempt to connect mains power, or any other power source,
before consulting service personnel.
The plug connecting the power cord to the product power •
supply serves as the main disconnect device for this
equipment. The power cord must always be easily accessible.
Route the power cord so as to avoid it being walked on or •
pinched by items placed upon or against it. Pay particular
attention to the plugs, receptacles and the point where the
cord exits from the apparatus.
Do not tug the power cord.•
If the provided plug does not fit into your outlet, consult an •
electrician.
Never install cables, or any peripherals, without first •
unplugging the device from it’s power source.
Always use the power supply (AC–DC adapter) provided with •
this product.
Replace only with power supply (AC–DC adapter) specified •
by TANDBERG.
Never connect the attached power supply (AC–DC adapter) to •
other products.
Servicing
Do not attempt to service the apparatus yourself as opening •
or removing covers may expose you to dangerous voltages or
other hazards, and will void the warranty. Refer all servicing to
qualified service personnel.
Unplug the apparatus from its power source and refer •
servicing to qualified personnel under the following conditions:
If the power cord or plug is damaged or frayed. •
If liquid has been spilled into the apparatus.•
If objects have fallen into the apparatus. •
If the apparatus has been exposed to rain or moisture •
If the apparatus has been subjected to excessive shock by •
being dropped.
If the cabinet has been damaged.•
If the apparatus seems to be overheated. •
If the apparatus emits smoke or abnormal odor.•
If the apparatus fails to operate in accordance with the •
operating instructions.
Accessories
Use only accessories specified by the manufacturer, or sold with
the apparatus.
Communication Lines
Do not use communication equipment to report a gas leak in the
vicinity of the leak.