Computer Monitor User Manual

D14324.04—DECEMBER 2009
48
Profile series with Codec C60
Administrator Guide
Contents Introduction Getting started About the menus The settings menu Settings Library Cameras Appendices Contact us
See the TANDBERG PrecisionHD 1080p User Guide for
comprehensive information about the camera.
Go to: http://www.tandberg.com/docs
The PrecisionHD 1080p camera
Video out (HDMI, HD-SDI). For video signals, connect from the
video out on the camera to the video in on the codec.
Power and camera control. For power in and camera control,
connect from the camera control & power on the camera to
the Camera port on the codec. When the camera is used with
TANDBERG codecs power will be supplied through Camera Control
cable. When used with non-TANDBERG Codecs, you may have to
connect power separately.
HDMI and HD-SDI
HDMI is the main source for video out when connected to Codec
C60. Maximum resolution is 1080p60.
HD-SDI is the secondary source for video. Maximum resolution
is 1080p30.
The HDMI and HD-SDI can be used simultaneously. The
maximum resolution is then 1080p30 if you want both to run with
the same resolution.
Kensington lock
The Kensington lock may be used to prevent the camera to be
moved from its place or to prevent theft.
Cascaded cameras
The sockets named Extra Camera Out and Power In are used when
connecting cameras in daisy chain.
The first camera in the chain is powered up by the camera
control cable. The next cameras must use the 12V DC Power in.
The daisy chained cameras are connected by using an extra
camera cable between the Extra Camera sockets.
Power Supply
Extra Camera Out and for Daisy Chaining
Camera Control HDMI Video Out
Not Used
HD-SDI Out
HDMI and HD-SDI can be
used simultaneously.
The lens hood is detachable.
We recommend that you
mount it to prevent stray light
from disturbing your video
experience.
Just snap it on gently.
The orange LED illuminates while in a
call and flickers when there is an
incoming call.
Kensington lock
The green LED is continuously illuminated
when power is On, but it flickers when
receiving signals from the remote control.
NOTE: The green LED is hidden behind
the top grille on TANDBERG Profile 65”.
Disassemble the top grille to see the LED.
Contents
Introduction
Getting started
About the menus
The Settings menu
The Settings library
Cameras
Appendices
Contact us
Cameras