- Tandberg Multi-Room Video System Assembly Guide

PA GE 4 /5 8
119078.01 TELEPRESENCE T3 SYSTEM ASSEMBLY 12.08
TANDBERG
Telepresence T3
CEILING LIGHTS
Unpack the box marked ‘Main Lighting T3’. The box contains the Telepresence
T3 Ceiling lighting modules.
The rear ceiling lighting consists of seven 640 mm spot light armatures
mechanically fastened together and parallel wired together. Recommended
positioning for the rear ceiling lighting are rear edge 5 cm / 2” from the inner rear
wall and 228 cm / 7’ 5
3
⁄4” from the floor. )
The front ceiling lighting consists of four 450 mm spot light armatures plus three
fluorescent light armatures mechanically fastened together and parallel wired
together. Recommended positioning for the front ceiling lights is rear edge
200 cm / 6’ 6
7
⁄10” from inner rear wall and bottom edge 228 cm / 7’ 5
3
⁄4” from the
floor).
Ceiling attachment by means of hang wires provided with lighting. Anchor
method in ceiling will depend on ceiling structure and composition. You may
want to consult an architect or building engineer to define the suitable mounting
method.
The lights are to be connected to a switch as described in the document
TANDBERG Telepresence T3—Room Requirements.
Power supply requirements can be found in the document TANDBERG
Telepresence T3—Room Requirements.
228 cm
7’ 5
3
⁄4”